Important compatibility info
Inner diameter | 14.2 mm |
Diameter | 35 mm |
Length | 60 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6388 |
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Thread Type | with internal thread |
Thread Size | M10x1 |
Length | 503 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information | with banjo fitting |
Additional Information 2 | without banjo bolt |
Important compatibility info
Placement on Vehicle | Rear Axle, Left, Right |
Function | Bushing, axle cross member |
Type | Bushing, axle cross member |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Anticlockwise rotation |
Rated Power | 1.8 kW |
Number of mounting bores | 3 |
Starter Type | Self-supporting |
Function | Starter |
Type | Starter |
Important compatibility info
Inner diameter 1 | 54 mm |
Inner diameter 2 | 47 mm |
Colour | Black |
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Inner diameter 2 | 48 mm |
Colour | Black |
Inner diameter 1 | 48 mm |
Material | Silicone |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Function | Tie Rod End |
Type | Tie Rod End |
Thread Type | with left-hand thread |
Placement on Vehicle | Front Axle Left |
Length | 110 mm |
Thread Measurement 1 | M20X1.5 |
Thread Measurement 2 | M16X1.5 |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with external thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Placement on Vehicle | Front Axle Right, outer |
Paired article numbers | FTR5636 |
Important compatibility info
Bearing Code | Gen 1 |
Additional Information 2 | with integrated ABS sensor |
Inner diameter 1 | 35 mm |
Outer diameter 1 | 72 mm |
Width 1 | 33 mm |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Tightening Torque | 70 Nm |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 556 mm |
Type | Warning Contact, brake pad wear |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Water Pump Pulley Diameter | 65 mm |
Type | Water Pump, engine cooling |
Impeller Diameter | 74.9 mm |
Important compatibility info
Housing material | Aluminium |
Impeller Diameter | 60 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Water Pump Pulley Diameter | 48 mm |
Water pump impeller material | Plastic |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Steering arm type | for control arm |
Paired article numbers | FBJ5793 |
Bore Diameter | 49 mm |
Function | Ball Joint |
Type | Ball Joint |
Cone Size | 21 mm |
Number of mounting bores | 3 |
Mounting Type | Bolted |
Version | Fitting Kit |
Important compatibility info
Type | Master Cylinder, clutch |
Inner diameter | 19.05 mm |
Function | Master Cylinder, clutch |
Material | Plastic |
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 656 mm |
External Teeth, Wheel Side | 28 |
External Teeth, Diff.Side | 27 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Slave Cylinder, clutch |
Diameter | 23.8 mm |
Type | Slave Cylinder, clutch |
Material | Cast Iron |
Important compatibility info
Function | Brake Hose |
Length 2 | 221 mm |
Length 1 | 350 mm |
Thread Size | M10x1 |
Thread Type | with internal thread |
Type | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with banjo bolt |
Mounting Bolt Thread Size | M10x1.5 |
Important compatibility info
Height | 66 mm |
Outer diameter | 330 mm |
Number of Holes | 5 |
Minimum thickness | 22.4 mm |
Centering Diameter | 75 mm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | Vented |
Brake Disc Thickness | 24 mm |
Replaces | BBD6039S |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Outer diameter | 345 mm |
Function | Brake Disc |
Centering Diameter | 63.6 mm |
Minimum thickness | 27.5 mm |
Brake Disc Thickness | 30 mm |
Height | 48 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Type | Brake Disc Rotor |
Quantity | 1 |
Surface | Coated |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023