Important compatibility info
Outer diameter | 28 mm |
Number of Connectors / Ports | 3 |
Outer diameter 1 | 28 mm |
Opening Temperature | 91 °C |
Outer diameter 2 | 18 mm |
Function | Thermostat, coolant |
Weight | 0.160 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 14.5 mm |
Weight | 2.77 kg |
Placement on Vehicle | Rear Axle |
Length | 325 mm |
Outer diameter | 100 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.040 kg |
Cable Length | 700 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Pump, engine cooling |
Weight | 1.05 kg |
Number of Wings | 7 |
Additional Information 2 | non-switchable water pump |
Function | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Seal Material | Paper |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 360 mm |
Function | Hydraulic Hose, steering |
Weight | 0.36 kg |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Length | 356 mm |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179441 |
Weight | 2.561 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179440 |
Weight | 2.561 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.483 kg |
Placement on Vehicle | both sides |
Length | 564 mm |
Housing Diameter | 22 mm |
Eject Force | 620 N |
Stroke | 155 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 373.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 292 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Thickness | 62 mm |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Weight | 4.830 kg |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Weight | 5.0 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 257 mm |
Thickness | 38 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 19 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 64 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 179984 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5 kg |
Placement on Vehicle | Front Axle, Rear Axle, non-steered trailing axle |
Outer diameter | 131 mm. 190 mm |
Thickness | 395 mm |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 179982 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right, Upper |
Weight | 1.5 kg |
Steering arm type | Control Arm |
Material | Aluminium |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Material | Cast Aluminium |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 1.300 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.541 kg |
Inner diameter | 10 mm |
Function | Suspension Strut Support Mount |
Height | 73 mm |
Additional Information 2 | without ball bearing |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.85 kg |
Placement on Vehicle | Front Axle, Rear Axle, Centre |
Length | 175.4 mm |
Material | Rubber/Metal |
Outer diameter | 138.8 mm |
Thickness | 75 mm. 95 mm |
Mounting points diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Hole Spacing | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Repair Set, door |
Placement on Vehicle | both sides, Front and Rear |
Additional Information | with squeeze connector |
Cable Length | 420 mm |
Number of circuits | 28 |
Weight | 0.178 kg |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.33 kg |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.600 kg |
Length | 306 mm |
Height | 97 mm |
Width | 193 mm |
Filter type | Filter Insert |
Type | Air filter kit |
Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023