Important compatibility info
Width | 61 mm |
Outer diameter | 119 mm |
Inner diameter | 24 mm |
Number of Holes | 3 |
Bolt Hole Circle Diameter | 85 mm |
Weight | 1.15 kg |
Placement on Vehicle | Front Axle |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Number of Connectors / Ports | 4 |
Function | Relay Valve |
Internal Thread Size | M22 x 1,5 |
Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 758 mm |
Weight | 0.046 kg |
Type | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172609 |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 171 mm. 118 mm |
Thickness | 56 mm |
Inner diameter | 60 mm |
Weight | 1.645 kg |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 8 mm |
Length | 664 mm |
Housing Diameter | 19 mm |
Housing length | 363.5 mm |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 16.5 mm |
Eject Force | 535 N |
Stroke | 237 mm |
Placement on Vehicle | both sides |
Weight | 0.294 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Right Rear |
Operating Mode | Electric |
Paired article numbers | 108258 |
Function | Window Regulator |
Weight | 0.55 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.22 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30992)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32368)
Important compatibility info
Outer diameter | 69 mm |
Outer diameter 1 | 65 mm |
Function | Charge Air Hose |
Additional Information 2 | with quick couplers |
Turbocharger line | Turbocharger to charge air cooler |
Placement on Vehicle | Charge Air Cooler, Right |
for OE number | 1K0 145 832 B |
Type | Charge Air Hose |
Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | without electric motor |
Paired article numbers | 179349 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Weight | 0.55 kg |
Function | Window Regulator |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 108257 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.08 kg |
Placement on Vehicle | Rear Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40368 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28291)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
- 1x Febi Nut (38356)
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 1.1 kg |
Outer diameter | 79 mm |
Number of grooves | 10 |
Width of castor bearing surface | 41 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Weight | 1.0 kg |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber, Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.838 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | CR (chloroprene rubber) |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 55 mm |
Weight | 0.445 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 640 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.1 kg |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.170 kg |
Height | 507 mm |
Outer diameter | 265 mm |
Inner diameter | 160 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.110 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.846 kg |
Placement on Vehicle | Front Axle Right |
Steering arm type | Control Arm |
Paired article numbers | 34670 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21456)
Important compatibility info
Light Design | LED |
Mounting bores distance | 78 mm |
Length | 181 mm |
Fulfils ECE norm | R7, R91 |
Placement on Vehicle | Right |
Cable Length | 500 mm |
Type | End Outline Marker Light |
Weight | 0.169 kg |
Voltage from | 12 V |
Port / Connector type | PRS |
Voltage to | 24 V |
Protection Type (IP Code) | IP67 |
Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 110 mm |
Outer diameter | 47 mm |
Inner diameter | 10 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.515 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with sensor |
Weight | 0.25 kg |
Opening Temperature | 80 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Pipe Diameter | 18 mm |
Paired article numbers | 25188 |
Length | 400 mm |
Weight | 1.188 kg |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Function | Thermostat Housing |
Weight | 0.299 kg |
Additional Information 2 | with seal ring |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174577 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Material | Sheet Steel |
Weight | 3.24 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 3.24 kg |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174578 |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.564 kg |
Inner Length | 700 mm |
Outer Length | 1020 mm |
Type | Cable Pull, clutch control |
Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.523 kg |
Width of castor bearing surface | 31 mm |
Outer diameter | 63 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 6 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Outer diameter | 60 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 25 mm |
for OE number | 16 138 400 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shoe Set, parking brake |
Additional Information | with fastening/mounting material |
Inspection Tag | ECE R90 Approved |
Outer diameter | 210 mm |
Width | 30 mm |
Placement on Vehicle | Rear Axle |
Weight | 1.77 kg |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.75 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Function | Ignition Coil |
Type | Ignition Coil |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.366 kg |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 76.5 mm |
Material | Metal |
Width | 46 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Opening Temperature | 92 °C |
Function | Thermostat, coolant |
Weight | 0.325 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with sensor |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Function | Diaphragm Brake Cylinder |
Piston Rod Length | 15 mm |
Distance of fastening bolts | 120 mm |
Type | Diaphragm Brake Cylinder |
Brake Type | Disc Brake |
Weight | 2.8 kg |
Parameter | Typ 16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Number of Ribs | 6 |
Material | Metal |
Outer diameter | 110 mm |
Weight | 0.844 kg |
Width of castor bearing surface | 27.5 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Length | 1005 mm |
Number of Connectors / Ports | 2 |
Weight | 0.06 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 48 mm |
Outer diameter | 84 mm |
Inner diameter | 49 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Weight | 1.155 kg |
Type | Wheel Bearing Kit |
Additional Information | with gaskets/seals |
Additional Information 2 | with shaft seal, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23657)
- 1x Febi Shaft Seal, wheel bearing (23662)
- 6x Febi Screw (23658)
- 1x Febi Seal Ring, wheel hub (23661)
- 1x Febi Seal, axle cap (23660)
- 1x Febi Cover Plate, dust-cover wheel bearing (23659)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 35.8 mm |
Outer diameter | 80 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing |
Weight | 0.75 kg |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 107 °C. 92 °C |
Type | Thermostat, coolant |
Weight | 0.245 kg |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172518 |
Number of Connectors / Ports | 2 |
Cable Length | 670 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.045 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.524 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 7H0 199 256 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Placement on Vehicle | Front Axle |
Outer diameter | 262 mm |
Thickness | 43.5 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Weight | 3.829 kg |
Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.830 kg |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Material | Plastic |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
External Teeth, Wheel Side | 23 |
Thread Size | M18x1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.480 kg |
Internal Teeth, wheel side | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Function | Pump, fuel pre-supply |
Material | Aluminium |
Type | Pump, fuel pre-supply |
Weight | 0.040 kg |
Additional Information 2 | with pre-filter |
Length | 91 mm |
Internal Thread Size | M14 x 1,5 |
Replaces | 22471 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 65 mm |
Function | Tensioner Pulley, timing belt |
Weight | 0.45 kg |
Type | Tensioner Pulley, timing belt |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.972 kg |
Width of castor bearing surface | 26 mm |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023