Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Ignition Switch |
| Number of Connectors / Ports | 7 |
| Weight | 0.160 kg |
| Type | Ignition Switch |
| Housing material | Cast Aluminium |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.04
Important compatibility info
| Function | Oil sump |
| Weight | 2.8 kg |
| Type | Oil sump |
| Additional Information | without oil drain plug |
| Wet Sump Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.02
Important compatibility info
| Weight | 0.610 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 8E0 721 257 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.01
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 705 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.01
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.551 kg |
| Type | Oil Cooler, engine oil |
| Height | 43 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (105939)
- 1x Febi Gasket Set, oil cooler (105944)
£40.01
Important compatibility info
| Cable Length | 1825 mm |
| Weight | 0.226 kg |
| Resistance | 1050 Ohm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 170831 |
| Placement on Vehicle | Front Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.01
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.89 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Semi-trailing Arm |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.01
Important compatibility info
| Weight | 3.450 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29143 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.00
Important compatibility info
| Rotor Style | Solid |
| Weight | 4.420 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 271 mm |
| Thickness | 60.8 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.00
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 3.5 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 240 mm |
| Thickness | 40 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.2 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.00
Important compatibility info
| Inner diameter | 51 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 50 mm |
| Outer diameter | 96 mm |
| Additional Information | with fastening/mounting material |
| Weight | 2.8 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.00
Important compatibility info
| Weight | 0.75 kg |
| Number of Teeth | 18 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Water pump impeller material | Plastic |
| Number of Wings | 24 |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.00
Important compatibility info
| Weight | 1.00 kg |
| Colour | Green |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 653 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.99
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.725 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.99
Important compatibility info
| Weight | 0.38 kg |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 138 |
| Timing Chain Size | G53HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.99
Important compatibility info
| Weight | 0.900 kg |
| Material | Rubber/Metal |
| Hole Spacing | 110 mm |
| Placement on Vehicle | Front, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.99
Important compatibility info
| Weight | 1.5 kg |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 340 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.99
Important compatibility info
| Weight | 0.384 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186660, 187042 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.98
Important compatibility info
| Weight | 0.040 kg |
| Placement on Vehicle | inner, both sides |
| Length | 414 mm |
| Outer diameter | 7 mm |
| Inner diameter | 4 mm |
| Function | Cable Pull, door release |
| Type | Cable Pull, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.98
Important compatibility info
| Weight | 1.56 kg |
| Placement on Vehicle | Lower Right |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
| Paired article numbers | 197668 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.97
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023