Important compatibility info
Number of Chain Links | 190 |
Function | Timing Chain Kit |
Replaced by | 48382 |
Chain Type | Duplex, with chain lock |
Timing Chain Size | D67HR, D67HP |
Type | Timing Chain Kit |
Weight | 2.260 kg |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Vacuum Pump, braking system |
Type | Vacuum Pump, braking system |
Additional Information | with gasket/seal |
Weight | 0.690 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Plastic |
Material | Cast Aluminium |
Number of Teeth | 28 |
Number of Wings | 6 |
Weight | 1.53 kg |
Function | Water Pump, engine cooling |
Housing Type | with housing |
Seal Material | Rubber |
Additional Information 2 | with thermostat |
Type | Water Pump, engine cooling |
for OE number | 04E 121 600 CR |
Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.7 kg |
Length | 698 mm |
Outer diameter | 60 mm |
Number of Connectors / Ports | 3 |
Stroke | 457 mm |
Mounting points diameter | 35 mm. 25 mm |
Function | Tilt Cylinder, driver cab |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Pulley Diameter | 180 mm |
Oil Fill Quantity | 175 ml |
Number of grooves | 8 |
Voltage | 24 V |
Pulleys | with belt pulley |
Function | Compressor, air conditioning |
Weight | 8.14 kg |
Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 190 mm. 385 mm |
External Thread Size | M20 x 1,5, M12 x 1,5, M12 x 1,75 |
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Additional Information | with piston |
Outer diameter | 323 mm. 259 mm |
Weight | 9.8 kg |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill quantity | 6 l |
Weight | 2.5 kg |
Length | 425 mm |
Width | 400 mm |
Material | PP (Polypropylene) |
Thickness | 245 mm |
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Weight | 6.41 kg |
Type | Repair Kit, kingpin |
Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, steering knuckle (18990)
- 1x Febi Seal Ring, steering knuckle (18994)
- 1x Febi Seal Ring, steering knuckle (170026)
- 1x Febi Spacer, kingpin (19250)
- 1x Febi Spacer, kingpin (19251)
- 1x Febi Spacer, kingpin (19252)
- 1x Febi Spacer, kingpin (19253)
- 1x Febi Spacer, kingpin (19254)
- 1x Febi Spacer, kingpin (19255)
- 1x Febi Spacer, kingpin (170028)
- 1x Febi Spacer, kingpin (170029)
- 1x Febi Spacer, kingpin (170030)
- 1x Febi Bush, steering knuckle (18993)
- 2x Febi Seal Ring, steering knuckle (18992)
- 1x Febi Lock Ring, steering knuckle (19029)
- 2x Febi Circlip (04687)
- 1x Febi Grease Nipple (06533)
- 1x Febi Lock Ring, steering knuckle (19224)
- 1x Febi Kingpin (177910)
Important compatibility info
Width | 185 mm |
Thickness | 130 mm |
Bearing Type | Tapered Roller Bearing |
Type | Hub, engine cooling fan wheel |
Function | Hub, engine cooling fan wheel |
Weight | 6.0 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 655 mm |
Weight | 5.206 kg |
Multi-piece | one-piece |
Type | Propshaft, axle drive |
Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Material | Metal |
Width | 170 mm |
Operating Mode | Automatic |
Outer diameter | 55 mm |
Width of castor bearing surface | 26 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 1.122 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 46860563 |
Weight | 3.794 kg |
Placement on Vehicle | Rear |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
for OE number | 13568-39016 S6 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Number of Teeth | 97 |
Weight | 3.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173549)
- 1x Febi Water Pump, engine cooling (24589)
Important compatibility info
Weight | 6.85 kg |
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106140 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
for OE number | 11 12 8 581 798 |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Weight | 1.892 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 1.28 kg |
Type | Sensor, urea supply |
Function | Sensor, urea supply |
Screw length below head | 615 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Height | 148 mm |
Width | 420 mm |
Additional Information 2 | with bulbs |
Voltage | 24 V |
Inspection Tag | ADR |
Paired article numbers | 193020 |
Port / Connector type | AMP 7 pin, 4 x 2 pin Superseal |
Number of Connectors / Ports | 15 |
Light Function | with rear fog light, with indicator, with taillight, with stop light, with reverse light, with reflector (triangular), without number plate light |
Weight | 1.6 kg |
Depth | 85 mm |
Protection Type (IP Code) | IP54 |
Type | Tail Light Assembly |
Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.683 kg |
for OE number | 71753156 S4 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Surface | Coated |
Number of Teeth | 129 |
Width | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (49385)
- 1x Febi Water Pump, engine cooling (43517)
Important compatibility info
Length | 80 mm |
Mounting points diameter | 5.5 mm |
Width | 53 mm |
Thickness | 43 mm |
Function | Pressure Control Valve, common rail system |
Type | Pressure Control Valve, common rail system |
Weight | 0.195 kg |
for OE number | 51.12505.0034 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Weight | 0.25 kg |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Plastic |
Weight | 4.7 kg |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Number of grooves | 10 |
Material | Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 2 310 611 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Starter |
Weight | 8.1 kg |
Rated Power | 4.5 kW |
Number of Teeth | 10 |
Voltage | 24 V |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | EGR Valve |
Function | EGR Valve |
Weight | 0.395 kg |
Connector Shape | rectangular |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Additional Information 2 | with spacer plate |
Weight | 3.076 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 180 A |
Belt Pulley Diameter | 56 mm |
Weight | 8.0 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 155 mm |
Width | 50 mm |
Inner diameter | 31 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Replaces | 29453 |
Weight | 3.164 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.773 kg |
Function | Timing Chain Kit |
Number of Chain Links | 170 |
Chain Type | Silent Chain, Closed chain |
Extra Description | Basic Short Kit |
Type | Timing Chain Kit |
for OE number | 06K 109 467 K S1 |
Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (49551)
- 1x Febi Timing Chain (45956)
- 1x Febi Guide, timing chain (46471)
- 1x Febi Guide, timing chain (102194)
- 1x Febi Guide, timing chain (102195)
Important compatibility info
for OE number | 651 180 14 00 |
Type | Oil Pump |
Function | Oil Pump |
Weight | 1.86 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.814 kg |
Additional Information | with gaskets/seals |
Function | Cooler, exhaust gas recirculation |
Type | Cooler, exhaust gas recirculation |
for OE number | 03L 131 512 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023