Important compatibility info
Diameter 1 bump stop | 27 mm |
Dust protection diameter 2 | 61 mm |
Function | Dust Cover Kit, shock absorber |
Dust protection height | 193 mm |
Diameter 2 bump stop | 50 mm |
Height of bump stop | 67 mm |
Placement on Vehicle | Front Axle |
Dust protection diameter 1 | 27 mm |
Type | Dust Cover Kit, shock absorber |
Important compatibility info
Length | 190 mm |
Additional Information 2 | with clamps |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 59 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber |
Important compatibility info
Thread Type | with internal thread |
Thread Size | M10x1 |
Additional Information | with banjo fitting |
Length | 361 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Right |
Additional Information 2 | with banjo bolt |
Mounting Bolt Thread Size | M10x1 |
Important compatibility info
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Placement on Vehicle | Left, Right, Rear |
Important compatibility info
Function | Bushing, axle beam |
Placement on Vehicle | Left, Right, outer, Rear |
Type | Bushing, axle beam |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 1.1 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 1 |
Function | Starter |
Manufacturer Restriction | Bosch |
Type | Starter |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 1.1 kW |
Number of mounting bores | 2 |
Number of Thread Bores | 1 |
Function | Starter |
Type | Starter |
Manufacturer Restriction | Bosch |
Important compatibility info
Colour | Black |
Outer diameter 2 | 73 mm |
Outer diameter 1 | 73 mm |
Material | Plastic |
Function | Intake Hose, air filter |
Type | Intake Hose, air filter |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
Important compatibility info
Inner diameter 2 | 59 mm |
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 1 | 59 mm |
Colour | Black |
Important compatibility info
Inner diameter 2 | 45 mm |
Material | ACM (Polyacrylate) |
Colour | Black |
Inner diameter 1 | 45 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Important compatibility info
Thread Measurement 2 | M24X1.5 |
Thread Measurement 1 | M30X1.5 |
Length | 988 mm |
Type | Centre Rod Assembly |
Pipe Diameter | 50 mm |
Function | Centre Rod Assembly |
Rod/Strut | Push Rod |
Important compatibility info
Thread Measurement 1 | M14x1.5 LHT male |
Thread Type | with left-hand thread, with external thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Axle Joint Length | 258 mm |
Thread Measurement 2 | M14X1.5 |
Length | 258 mm |
Thread Measurement 1 | M16X1.5 |
Function | Inner Tie Rod |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Thread Type | with external thread |
Length | 295 mm |
Thread Measurement 1 | M18X1.5 |
Thread Measurement 2 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 295 mm |
Type | Inner Tie Rod |
Important compatibility info
Axle Joint Length | 311 mm |
Thread Measurement 2 | M16X1.5 |
Length | 312 mm |
Thread Measurement 1 | M16X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Important compatibility info
Important compatibility info
Placement on Vehicle | Front Axle |
Function | Warning Contact, brake pad wear |
Length | 645 mm |
Type | Warning Contact, brake pad wear |
Required quantity | 1 |
Important compatibility info
Number of Wings | 6 |
Water Pump Pulley Diameter | 59 mm |
Housing Type | with housing |
Additional Information | with gaskets/seals |
Number of Teeth | 20 |
Impeller Diameter | 61 mm |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Important compatibility info
Number of Teeth | 23 |
Number of Parts | 2 -part |
Outer diameter | 270 mm |
Engine Version | for engines with dual-mass flywheel |
Hub Profile | 26.2 x 23.2 |
Function | Clutch Kit |
Type | Clutch Kit |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023