Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.977 kg |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Teeth | 20 |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.632 kg |
| Housing material | Metal |
| Operating Mode | Automatic |
| Outer diameter | 66 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Width | 33 mm |
| Material | Plastic |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.16 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.46
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 107614 |
| Weight | 0.048 kg |
| Cable Length | 610 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 2.726 kg |
| External Teeth, Wheel Side | 28 |
| Internal Teeth, wheel side | 39 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171897)
- 1x Febi Split Pin (02877)
- 1x Febi Nut, kingpin (45450)
£38.45
Important compatibility info
| Weight | 1.036 kg |
| Inner Length | 726 mm |
| Outer Length | 917 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.47 kg |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 331 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 44 mm. 54 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, oil pressure |
| Screw length below head | 11 mm |
| Spanner Size | 24 |
| Weight | 0.054 kg |
| Additional Information 2 | with seal ring |
| Length | 49 mm |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, oil pressure |
| for OE number | 22899626 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.588 kg |
| Length | 138 mm |
| Width | 90 mm |
| Material | Aluminium |
| Thickness | 88 mm |
| Function | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (100798)
- 1x Febi Gasket, oil cooler (48367)
£38.45
Important compatibility info
| Weight | 0.25 kg |
| Extra Description | febi Plus |
| Additional Information 2 | with switch, with bolts/screws |
| Function | Steering Lock |
| Number of Connectors / Ports | 5 |
| Type | Steering Lock |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Material | Cast Aluminium |
| Weight | 0.580 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Silicone |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.430 kg |
| Additional Information 2 | with rolling bearing |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (107322)
- 1x Febi Bearing, propshaft centre bearing (05362)
£38.45
Important compatibility info
| Weight | 0.97 kg |
| Core Width | 176 mm |
| Core Depth | 42 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Extra Description | febi Plus |
| External Thread Size | M10 x 1,25 |
| Length | 394 mm |
| Wet Sump Material | Sheet Steel |
| Colour | Black |
| Weight | 1.38 kg |
| Type | Oil sump |
| Function | Oil sump |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.4 kg |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 32 mm |
| Weight | 0.195 kg |
| Cooling Hose | from engine to thermostat |
| Type | Radiator Hose |
| Wall Thickness | 3.5 mm |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.200 kg |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Type | Joint Kit, drive shaft |
| Weight | 2.170 kg |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 25 |
| External Teeth, Wheel Side | 42 |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.36 kg |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 06B 905 115 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.7 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023