Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G67HP, G67HR |
| Function | Timing Chain Kit |
| for OE number | 13506-33020 S2 |
| Additional Information | with chain tensioner, with slide rails |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30668)
- 1x Febi Tensioner, timing chain (108814)
- 1x Febi Guide, timing chain (107899)
- 1x Febi Guide, timing chain (107897)
- 1x Febi Gear/Sprocket, camshaft (108815)
- 1x Febi Sprocket, crankshaft (108816)
- 1x Febi Shaft Seal, crankshaft (101159)
Important compatibility info
| Length | 946 mm |
| Material | Aluminium |
| Outer diameter | 276 mm |
| Number of Connectors / Ports | 5 |
| Capacity | 50 l |
| Operating Pressure | 15.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Crankshaft, air compressor |
| Function | Crankshaft, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 21738128 |
| Function | Dosing Module, urea injection |
| Type | Dosing Module, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Standard Medium Kit |
| Placement on Vehicle | Upper, Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 86. 70 |
| Timing Chain Size | G53HS, G68HS |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49505)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Timing Chain (49528)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
- 1x Febi Gear, injection pump (101088)
- 1x Febi Gear/Sprocket, camshaft (101918)
- 1x Febi Oil Jet, timing chain (101919)
- 1x Febi Shaft Seal, crankshaft (102041)
Important compatibility info
| Pressure side external thread size | M12 x 1 |
| Suction side external thread size | M12 x 1 |
| Function | Tilt Cylinder, driver cab |
| Length | 603 mm |
| Outer diameter | 55 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 359 mm |
| Mounting points diameter | 25 mm |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cooler, exhaust gas recirculation |
| Type | Cooler, exhaust gas recirculation |
| Additional Information | with gaskets/seals |
| for OE number | 03L 131 512 AF SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Function | Compressor, compressed-air system |
| Type | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100. 78 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (182978)
- 1x Febi Tensioner, timing chain (182785)
- 1x Febi Guide, timing chain (184483)
- 1x Febi Guide, timing chain (186313)
- 1x Febi Guide, timing chain (197409)
- 1x Febi Timing Chain (184830)
- 1x Febi Tensioner, timing chain (180246)
- 1x Febi Guide, timing chain (183264)
- 1x Febi Guide, timing chain (197408)
- 1x Febi Gear, intermediate shaft (185619)
- 1x Febi Sprocket, crankshaft (198183)
Important compatibility info
| Number of grooves | 8 |
| Function | Compressor, air conditioning |
| Belt Pulley Diameter | 136 mm |
| Oil Fill Quantity | 165 ml |
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Compressor ID | 7SEU17C |
| Oil Fill Quantity | 180 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 4 |
| Fill Medium | Brake Fluid |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 115 ml |
| Number of grooves | 6 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 180 A |
| Belt Pulley Diameter | 50 mm |
| Current Strength | 180 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Belt Tensioner, v-ribbed belt |
| Width | 53 mm |
| Material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
| Operating Mode | Automatic |
| Outer diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | with bolts/screws, with spacer plate |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Seal Material | ACM (Polyacrylate) |
| Additional Information 2 | with seal ring, with bolts/screws |
| Function | Hydraulic Filter Kit, automatic transmission |
| Extra Description | febi Plus |
| Type | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mechatronics, automatic transmission (32342)
- 1x Febi Hydraulic Filter, automatic transmission (09463)
- 1x Febi Plug-in housing, automatic transmission (control unit) (36332)
- 6x Febi Bolt, automatic transmission oil sump (46395)
- 1x Febi Gasket, automatic transmission oil sump (47393)
- 1x Febi Screw Plug, oil sump (46267)
- 2x Febi Hydraulic Filter Kit, automatic transmission (47282)
- 1x Febi Gasket, automatic transmission oil sump (10072)
- 2x Febi Hydraulic Filter Kit, automatic transmission (47283)
- 1x Febi Locking Pin, auto. trans. dipstick sealing piece (44204)
Important compatibility info
| Voltage | 24 V |
| Number of Ribs | 7 |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 86 mm |
| Type | Alternator |
| Function | Alternator |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control, swirl flaps (induction pipe) |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Number of Teeth | 42 |
| Placement on Vehicle | Intake Side |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 110 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 160 ml |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with castellated nut and split pins |
| Outer diameter | 42 mm |
| Length | 1924 mm |
| Placement on Vehicle | Front Axle, at steering arm, from 1st to 2nd intermediate steering lever |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 60 mm |
| External Thread Size | M24 x 1,5 |
| Cone Size | 30 mm |
| Thread Length | 25 mm |
| Driver Position | for left-hand/right-hand drive vehicles |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Number of Connectors / Ports | 2 |
| Spanner Size | 30 |
| Operating Mode | Manual |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 8 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Weight | 1.530 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G67HP |
| Extra Description | Standard Medium Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30499)
- 1x Febi Tensioner, timing chain (30511)
- 1x Febi Guide, timing chain (30464)
- 1x Febi Guide, timing chain (30465)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (25470)
Important compatibility info
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 106141 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 136 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49733)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (174547)
- 1x Febi Guide, timing chain (174544)
- 1x Febi Guide, timing chain (109450)
Important compatibility info
| Number of Connectors / Ports | 5 |
| Voltage | 24 V |
| Number of Ribs | 10 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 64 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 190 |
| Chain Type | Simplex, with chain lock |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HRF |
| Replaces | 49460 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45811)
- 1x Febi Tensioner, timing chain (26750)
- 1x Febi Guide Rails Kit, timing chain (49429)
Important compatibility info
| Number of Teeth | 36 |
| Paired article numbers | 178593 |
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Camshaft Adjuster |
| Paired article numbers | 178524 |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Set, automatic transmission |
| Function | Cable Set, automatic transmission |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 3770 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| for OE number | 50 01 868 535 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 3860 mm |
| Type | Cable Pull, manual transmission |
| for OE number | 50 01 868 534 |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 126 mm |
| Outer diameter | 160 mm |
| Function | Wheel Bearing Kit |
| Inner diameter | 90 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Multi-piece | One-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
| Length | 709 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 644 mm |
| Placement on Vehicle | Front |
| Multi-piece | One-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 49 mm |
| Outer diameter | 188 mm |
| Inner diameter | 55 mm |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Plastic |
| Colour | Black |
| Type | Fitting, intake manifold |
| Function | Fitting, intake manifold |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 119 mm |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 8 |
| Function | Compressor, air conditioning |
| Type | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 430 mm |
| Number of Teeth | 24 |
| for OE number | 574913 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41080 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head |
| Material | Metal |
| Thickness | 1.25 mm |
| Bore Diameter | 165 mm |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 650 mm |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
| Multi-piece | one-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































