Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 331 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 44 mm. 54 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Wire Diameter | 14.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 350 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Paired article numbers | 43025 |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Cone Size | 14 mm |
| Mounting points diameter | 14.5 mm |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 270 mm |
| Material | Steel |
| Thickness | 33 mm |
| Rod/Strut | Pull Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 106711 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Length | 1460 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (109594)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Height | 60 mm |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
- 1x Febi Suspension Strut Support Mount (171372)
£37.46
Important compatibility info
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 19 mm |
| Cooling Hose | from water pipe to auxiliary water pump |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
| Hose Length | 487 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Outer diameter | 88 mm |
| Inner diameter | 47 mm |
| Width | 58 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173995)
- 1x Febi Split Pin (173993)
£37.46
Important compatibility info
| Additional Information | with rubber mounts |
| Paired article numbers | 174791 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 522 mm |
| Housing Diameter | 19 mm |
| Stroke | 154 mm |
| Eject Force | 635 N |
| Housing length | 303 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Placement on Vehicle | Front Axle Left, Rear |
| Additional Information | with fastening/mounting material |
| Material | Aluminium |
| Paired article numbers | 176644 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Paired article numbers | 176643 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Rear |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with fastening/mounting material |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Cooling Hose | from coolant regulator housing to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Lower |
| Additional Information 2 | with clamps |
| Inner diameter | 31 mm |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Number of Teeth | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | with seal ring |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 10 |
| Additional Information | with gasket/seal |
| Seal Material | Rubber/Metal |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023