Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 310 mm |
| Outer diameter | 55 mm |
| Additional Information 2 | with pressure regulator |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Length | 1263 mm |
| Outer diameter | 3.24 mm |
| Inner diameter | 2 mm |
| External Thread Size | M12 x 1,5, M12 x 1 |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Wire Diameter | 14.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 350 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Paired article numbers | 43025 |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Cone Size | 14 mm |
| Mounting points diameter | 14.5 mm |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Placement on Vehicle | outer, Front Axle Left |
| Length | 188 mm |
| Thickness | 79 mm |
| Paired article numbers | 48112 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Length | 1460 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 19 mm |
| Cooling Hose | from water pipe to auxiliary water pump |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Outer diameter | 88 mm |
| Inner diameter | 47 mm |
| Width | 58 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173995)
- 1x Febi Split Pin (173993)
£37.46
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 350 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Cooling Hose | from coolant regulator housing to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Placement on Vehicle | Lower |
| Additional Information 2 | with clamps |
| Inner diameter | 31 mm |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Seal Material | Rubber |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Number of Teeth | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | with seal ring |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of Wings | 10 |
| Additional Information | with gasket/seal |
| Seal Material | Rubber/Metal |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 12 mm |
| Inner diameter | 10 mm |
| Outer diameter | 120 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 1018 mm |
| Additional Information 2 | with crown nut |
| Paired article numbers | 12940 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M18 x 1,5, M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1100768 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Inner diameter | 50 mm |
| Outer diameter 1 | 66 mm |
| Outer diameter | 59 mm |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Type | Charge Air Hose |
| Additional Information 2 | with clamp |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Rod/Strut | Suspension Rod |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Steering arm type | Trailing Arm |
| Material | Aluminium |
| Additional Information 2 | with rubber mount, with ball joint |
| External Thread Size | M14 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023