Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Function | Timing Chain |
| Timing Chain Size | G67HP, G67HR, G67AM |
| Number of Chain Links | 66 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Lower |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Timing Chain Size | G67HP, G67HR |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 492 mm |
| Housing Diameter | 18 mm |
| Eject Force | 420 N |
| Stroke | 190 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Length | 141 mm |
| Thickness | 38 mm |
| Function | Cylinder Head, air compressor |
| Width | 130 mm |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Length | 75 mm |
| Outer diameter | 39.8 mm. 46 mm |
| Spanner Size | 19 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 2 |
| Control Range | 0,25+0,15 bar |
| Function | Sensor, oil pressure |
| Switch point to | 5 bar |
| for OE number | 001 542 56 17 |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, oil pressure |
| Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 1x Febi Screw Plug, oil sump (15322)
- 1x Febi Seal Ring, oil screen (06435)
- 4x Febi Spark Plug (13533)
£38.41
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| for OE number | 51757887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 272 mm |
| Thickness | 37.1 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Diaphragm Brake Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Diaphragm Brake Cylinder |
| Brake Type | Disc Brake |
| Parameter | Typ 16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Type | Seal kit, automatic adjustment |
| Function | Seal kit, automatic adjustment |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 178142 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 104 |
| Timing Chain Size | G68VCO, G68V-1 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 980 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 805 813 |
| Hole Spacing | 186 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.40
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1225 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.40
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M24x1,5 |
| Internal Teeth, wheel side | 37 |
| External Teeth, Wheel Side | 30 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.40
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 25 mm |
| Outer diameter | 146 mm |
| Inner diameter | 44 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 365 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.39
Important compatibility info
| Length | 310 mm |
| Outer diameter | 55 mm |
| Additional Information 2 | with pressure regulator |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 101 mm |
| Width | 57.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Additional Information | with grease |
| Length | 382 mm |
| Outer diameter | 248 mm |
| Inner diameter | 120 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Outer diameter | 230 mm. 131 mm |
| Thickness | 420 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 64 mm |
| Material | Rubber/Metal |
| Outer diameter | 64 mm |
| Thickness | 64 mm |
| Inner diameter | 19 mm |
| Function | Mounting, stabiliser bar |
| Length | 147 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.37
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.36
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.36
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 106710 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023