Proud to be a UK-based company
Contact us
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 12 mm |
| Inner diameter | 10 mm |
| Outer diameter | 120 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Core Width | 176 mm |
| Core Depth | 42 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Length | 162 mm |
| Internal Teeth, wheel side | 25 |
| Outer diameter | 90 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 30 |
| Seal Diameter | 85.6 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 29 |
| Type | Joint Kit, drive shaft |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 36 |
| Length | 174 mm |
| Function | Joint Kit, drive shaft |
| Outer diameter | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1100768 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Fill Medium | Brake Fluid |
| Bore Diameter | 19 mm |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 09523 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Inner diameter | 50 mm |
| Outer diameter 1 | 66 mm |
| Outer diameter | 59 mm |
| Wall Thickness | 4.5 mm |
| Function | Charge Air Hose |
| Inner diameter 1 | 57 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Type | Charge Air Hose |
| Additional Information 2 | with clamp |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Cone Size | 17.5 mm |
| Function | Ball Joint |
| Paired article numbers | 43016 |
| Placement on Vehicle | Front Axle Left, Lower |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 12 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Inner diameter | 15 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Height | 61 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 177102 |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Length | 125 mm |
| Width | 68 mm |
| Thickness | 126 mm |
| Thread Type | with left-hand thread |
| Cone Size | 27 mm |
| Function | Angled Ball Joint, steering push rod |
| External Thread Size | M30 x 1,5, M24 x 1,5 |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Steering arm type | Control Arm |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting Kit, stabiliser link/coupling rod (21126)
- 2x Febi Screw (21478)
- 2x Febi Bolt, control arm (21481)
- 2x Febi Screw (21477)
- 2x Febi Screw (21475)
- 2x Febi Screw (21476)
- 2x Febi Screw (21479)
- 4x Febi Nut (15902)
- 6x Febi Nut (14392)
- 4x Febi Nut (22263)
£37.46
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Bore Diameter | 16 mm |
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.46
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 335 mm |
| Thickness | 120 mm |
| Paired article numbers | 44669 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (44668)
- 1x Febi Nut (38356)
£37.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023