Important compatibility info
Number of mounting bores | 3 |
Mounting Type | Bolted |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 2 | M12x1.25 |
Thread Measurement 1 | M14x1.5 |
Bore Diameter 1 | 17.7 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Length | 270 mm |
Material | Metal |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Thread Size | M10X1.25 |
Important compatibility info
Thread Size | M10x1 |
Thread Type | with internal thread |
Length | 634 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information | with banjo fitting |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with banjo bolt |
Mounting Bolt Thread Size | M10x1.5 |
Important compatibility info
Length | 470 mm |
Function | Brake Hose |
Type | Brake Hose |
Thread Type | with internal thread |
Additional Information | with banjo fitting |
Placement on Vehicle | Rear Axle Left |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Wheel Brake Cylinder |
Diameter | 17.5 mm |
Type | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 138 mm |
Inner diameter 2 | 82 mm |
Inner diameter 1 | 24 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 0 |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 29 mm |
Version | Full Kit |
Outer diameter 1 | 50 mm |
Width 1 | 17.5 mm |
Outer diameter 2 | 50 mm |
Width 2 | 17.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Bellow Kit, drive shaft |
Material | Polychloroprene (Neoprene) |
Length | 138 mm |
Inner diameter 2 | 82 mm |
Inner diameter 1 | 24 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Diameter | 19.1 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Thread Type | with internal thread |
Function | Brake Hose |
Length | 615 mm |
Additional Information | with banjo fitting |
Placement on Vehicle | Front Axle Right |
Type | Brake Hose |
Thread Size | M10x1 |
Additional Information 2 | without banjo bolt |
Important compatibility info
Inner diameter 1 | 35 mm |
Inner diameter 2 | 25 mm |
Outer diameter 1 | 65 mm |
Width 1 | 18 mm |
Outer diameter 2 | 52 mm |
Width 2 | 16.5 mm |
Spring Type | for vehicles with coil spring suspension |
Function | Wheel Bearing Kit |
Bearing Code | Gen 0 |
Type | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Important compatibility info
Material | Polychloroprene (Neoprene) |
Inner diameter 1 | 55 mm |
Colour | Black |
Inner diameter 2 | 63 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Important compatibility info
Function | Tie Rod End |
Thread Measurement 2 | M14x1.5 |
Thread Measurement 1 | M12x1.75 |
Placement on Vehicle | Front Axle Left, outer |
Type | Tie Rod End |
Paired article numbers | FTR5975 |
Important compatibility info
Length 1 | 1722 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Length 1 | 1689 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Important compatibility info
Mounting Type | Bolted |
Number of mounting bores | 4 |
Number of Rivet Holes | 4 |
Version | Fitting Kit |
Thread Measurement 2 | M16x1.5 |
Thread Measurement 1 | M8x1.25 |
Bore Diameter 1 | 17.1 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 218 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6664 |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 218 mm |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6663 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023