Important compatibility info
Weight | 0.326 kg |
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 65 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Number of Teeth | 24 |
Seal Material | Paper |
Water pump impeller material | Metal |
Weight | 0.950 kg |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 432 mm |
Placement on Vehicle | Front Axle |
Weight | 2.49 kg |
Function | Suspension Spring |
Number of Coils | 10 |
Outer diameter | 131 mm |
Wire Diameter | 10.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.252 kg |
Internal Teeth, wheel side | 24 |
External Teeth, Wheel Side | 29 |
Thread Size | M24x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 193249 |
Weight | 0.9 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Adaptor, electric filament |
Weight | 0.305 kg |
Function | Adaptor, electric filament |
Length | 1200 mm |
DIN / ISO | ISO 1185 |
Number of Connectors / Ports | 7 |
Paired article numbers | 48613 |
Version | OE Standard |
Additional Information 2 | with plug |
Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter | 63 mm |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Weight | 0.514 kg |
Number of Ribs | 6 |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.059 kg |
Paired article numbers | 176059 |
Placement on Vehicle | Right |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Deflection Pulley/Guide Pulley, timing belt |
Function | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 30 mm |
Weight | 0.195 kg |
Material | Plastic |
Outer diameter | 53 mm |
Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 15.5 mm |
Weight | 3.02 kg |
Outer diameter | 132 mm |
Length | 300 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 380 mm |
Number of Coils | 7 |
Outer diameter | 116 mm |
Wire Diameter | 12.8 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 3093100 |
Function | Repair Kit, clutch slave cylinder |
Weight | 0.134 kg |
Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Rear Axle Left, Upper, Rear Axle Right |
Weight | 0.594 kg |
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.09 kg |
Function | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Inner diameter | 54 mm |
Width | 50 mm |
Outer diameter | 90 mm |
Additional Information | with axle nut |
Sealing lip material | NBR (nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Function | Gas Spring, bonnet |
Housing length | 432 mm |
Placement on Vehicle | Right |
Length | 811 mm |
Housing Diameter | 26 mm |
Eject Force | 390 N |
Stroke | 176 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 28 |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Length | 165 mm |
Outer diameter | 87.5 mm |
Type | Joint Kit, drive shaft |
Seal Diameter | 56 mm |
Internal Teeth, wheel side | 25 |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Weight | 2.460 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Front Axle |
Weight | 4.515 kg |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Inner diameter | 70 mm |
Outer diameter | 150 mm |
Width | 54 mm |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.434 kg |
Placement on Vehicle | Rear Axle Left, Upper |
Paired article numbers | 175087 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Worklight |
Lumen | 2600 lm |
Voltage from | 9 V |
Depth | 63 mm |
Mounting Type | Fully assembled |
Light Design | LED |
Weight | 0.497 kg |
Rated Power | 24 W |
Light Distribution | Long-range illumination |
Plug Type | DEUTSCH plug |
Voltage to | 32 V |
Protection Type (IP Code) | IP6K9K |
Type | Worklight |
Fulfils ECE norm | R10, R148 |
Height | 123 mm |
Width | 143 mm |
Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 53 mm |
Material | Plastic |
Outer diameter | 69 mm |
Weight | 0.445 kg |
Mounting points diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023