Important compatibility info
| Additional Information | with lock nut |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 275 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| External Thread Size | M18 x 1,5 |
| Cable Length | 270 mm |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 36 |
| External Teeth, Wheel Side | 30 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Replaces | 27105 |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 93 mm |
| Inner diameter | 29 mm |
| Number of Ribs | 6 |
| Thickness | 24.5 mm |
| Function | Belt Pulley, power steering pump |
| Bolt Hole Circle Diameter | 63 mm |
| Hole Spacing | 54 mm |
| Extra Description | febi Plus |
| Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14246 |
| Placement on Vehicle | Front Axle Right, Lower |
| Replaces | 06505 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15952 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, driver cab suspension |
| Length | 225 mm |
| Outer diameter | 102 mm. 108 mm |
| External Thread Size | M10 x 1 |
| Type | Bellow, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 252 mm |
| Thickness | 40.15 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Adjuster, braking system |
| Operating Mode | Manual |
| Placement on Vehicle | Right |
| Type | Adjuster, braking system |
| Paired article numbers | 178698 |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 3 |
| Brake Type | Disc Brake |
| for OE number | 74 21 296 868 |
| Cable Length | 1630 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32106 |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Width | 30 mm |
| Material | Plastic |
| Outer diameter | 85 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44548 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39557)
- 1x Febi Ball Joint (36051)
Important compatibility info
| Function | Bush, steering knuckle |
| Outer diameter 1 | 62 mm |
| Type | Bush, steering knuckle |
| Inner diameter | 38 mm |
| Height | 55 mm |
| Outer diameter 2 | 46.5 mm |
| Bearing Type | Needle Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44547 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39558)
- 1x Febi Ball Joint (36052)
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Front |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 658 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 332 mm |
| Paired article numbers | 44285 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44282)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















