Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.098 kg |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.85 kg |
| Function | Water Pump, engine cooling |
| Number of Wings | 6 |
| Material | Cast Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Material | Plastic |
| Weight | 0.37 kg |
| Type | Washer Fluid Reservoir, window cleaning |
| Function | Washer Fluid Reservoir, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Weight | 1.570 kg |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Sensor Ring, ABS |
| Placement on Vehicle | Front Axle |
| Material | Steel |
| Outer diameter | 210 mm |
| Inner diameter | 186 mm |
| Weight | 0.720 kg |
| Type | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 100 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.63 kg |
| Additional Information | with coolant temperature sensor |
| Material | Aluminium |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
| Additional Information 2 | with sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Outer diameter | 157 mm |
| Weight | 2.2 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 120 mm |
| Thread Type | with right-hand thread |
| Cone Size | 28.6 mm |
| Internal Thread Size | M26 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.139 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 1000 mm |
| Paired article numbers | 107469 |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Placement on Vehicle | Centre, Left |
| Weight | 0.8 kg |
| Paired article numbers | 177934 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.23 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.35 kg |
| Material | Plastic |
| Outer diameter | 102 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Paired article numbers | 43026 |
| Weight | 1.076 kg |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.432 kg |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£35.48
Important compatibility info
| Internal Thread Size | M26 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Additional Information | with crown nut and split pin |
| Placement on Vehicle | Front Axle |
| Length | 90 mm |
| Cone Size | 28.6 mm |
| Extra Description | ProKit |
| Weight | 1.59 kg |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Width | 40.5 mm |
| Outer diameter | 102 mm |
| Inner diameter | 61 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Weight | 1.92 kg |
| Replaces | 34823 |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (31324)
- 1x Febi Wheel Bearing (30270)
£35.48
Important compatibility info
| Weight | 0.539 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Right, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32105 |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Length | 1460 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Weight | 0.15 kg |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.95 kg |
| Placement on Vehicle | Front Axle |
| Length | 313 mm |
| Outer diameter | 170 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 30 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.620 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 606 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 104756 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1193 mm |
| Function | Sensor, wheel speed |
| Weight | 0.065 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.300 kg |
| Function | Pressure Limiting Valve |
| Type | Pressure Limiting Valve |
| Mounting points diameter | 34 mm |
| Number of Connectors / Ports | 3 |
| Length | 73 mm |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 614 mm |
| Weight | 0.2 kg |
| Housing Diameter | 21 mm |
| Housing length | 389 mm |
| Type | Gas Spring, boot/cargo area |
| Stroke | 193 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 560 N |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 22 mm |
| Weight | 1.735 kg |
| Additional Information 2 | with crown nut |
| Length | 300 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
| Weight | 0.54 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 2.24 kg |
| Placement on Vehicle | Front Axle |
| Length | 335 mm |
| Outer diameter | 174 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173596 |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| Cable Length | 625 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.255 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with sensor |
| Opening Temperature | 80 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Seal Diameter | 50 mm |
| Internal Teeth, wheel side | 23 |
| Weight | 2.170 kg |
| Number of Teeth, ABS ring | 44 |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 87 mm |
| Length | 158 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Housing length | 397 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Mounting points diameter | 18 mm |
| Stroke | 212 mm |
| Eject Force | 880 N |
| Housing Diameter | 22 mm |
| Length | 680 mm |
| Placement on Vehicle | both sides |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Type | Roller Guide, sliding door |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Paired article numbers | 178442 |
| Placement on Vehicle | Centre, Right |
| Weight | 0.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.090 kg |
| Hose Length | 300 mm |
| Height | 50 mm |
| Width | 70 mm |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 23.5 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 11 15 7 522 931 |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.230 kg |
| Material | Plastic |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 53 mm. 40 mm |
| Min. Length | 195 mm |
| Max. Length | 225 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.1 kg |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 11 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.22 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.94 kg |
| Placement on Vehicle | Front Axle |
| Length | 128 mm |
| Spanner Size | 17 |
| Colour | Grey |
| Cone Size | 14.3 mm |
| Function | Pitman Arm |
| Type | Pitman Arm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Weight | 1.26 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 332 mm |
| Paired article numbers | 44285 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44283)
- 1x Febi Tie Rod End (44282)
£35.48
Important compatibility info
| Weight | 0.850 kg |
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (37648)
£35.48
Important compatibility info
| Weight | 0.795 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 05952 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 553 mm |
| Housing Diameter | 19 mm |
| Eject Force | 715 N |
| Stroke | 176 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 282.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.327 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 32 |
| Weight | 2.876 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Length | 2523 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.362 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function |
| Weight | 0.28 kg |
| Type | Direction Indicator Switch / Steering Column Switch / Switch, headlight |
| Function | Direction Indicator Switch / Steering Column Switch / Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 32106 |
| Steering arm type | Control Arm |
| Weight | 0.539 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Length | 1263 mm |
| Outer diameter | 3.24 mm |
| Inner diameter | 2 mm |
| Weight | 0.14 kg |
| External Thread Size | M12 x 1,5, M12 x 1 |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Centre |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.992 kg |
| Paired article numbers | 183092 |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.462 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179915)
- 2x Febi Protective Cap/Bellow, shock absorber (182820)
£35.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.705 kg |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 44 mm |
| Outer diameter | 409 mm |
| Inner diameter | 228 mm |
| Paired article numbers | 196031 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1960 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| for OE number | 46814966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023