Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Joint Kit, drive shaft |
| Weight | 2.960 kg |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| External Thread Size | M26 x 1,5 |
| Internal Teeth, wheel side | 34 |
| Seal Diameter | 68 mm |
| External Teeth, Wheel Side | 30 |
| Length | 148 mm |
| Outer diameter | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.427 kg |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.23 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 53 mm. 40 mm |
| Min. Length | 195 mm |
| Max. Length | 225 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.1 kg |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 2.6 kg |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Outer diameter | 140 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Internal Thread Size | M26 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Additional Information | with crown nut and split pin |
| Placement on Vehicle | Front Axle |
| Length | 90 mm |
| Cone Size | 28.6 mm |
| Extra Description | ProKit |
| Weight | 1.59 kg |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.016 kg |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 22 mm |
| Weight | 1.735 kg |
| Additional Information 2 | with crown nut |
| Length | 300 mm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.098 kg |
| Type | Fan Wheel, engine cooling |
| Function | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Outer diameter | 157 mm |
| Weight | 2.2 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.300 kg |
| Function | Pressure Limiting Valve |
| Type | Pressure Limiting Valve |
| Mounting points diameter | 34 mm |
| Number of Connectors / Ports | 3 |
| Length | 73 mm |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.229 kg |
| Paired article numbers | 176056 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Length | 1263 mm |
| Outer diameter | 3.24 mm |
| Inner diameter | 2 mm |
| Weight | 0.14 kg |
| External Thread Size | M12 x 1,5, M12 x 1 |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
| Pressure | 362 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.090 kg |
| Hose Length | 300 mm |
| Height | 50 mm |
| Width | 70 mm |
| Inner diameter 1 | 18 mm |
| Inner diameter 2 | 23.5 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 11 15 7 522 931 |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 553 mm |
| Housing Diameter | 19 mm |
| Eject Force | 715 N |
| Stroke | 176 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 282.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.327 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function |
| Weight | 0.28 kg |
| Type | Direction Indicator Switch / Steering Column Switch / Switch, headlight |
| Function | Direction Indicator Switch / Steering Column Switch / Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Weight | 1.570 kg |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Hose Line, driver cab tilting device |
| Length | 1460 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Weight | 0.15 kg |
| External Thread Size | M14 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 1.22 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Weight | 0.63 kg |
| Additional Information | with coolant temperature sensor |
| Material | Aluminium |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
| Additional Information 2 | with sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023