Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Length | 501 mm |
| Weight | 0.2 kg |
| Placement on Vehicle | both sides |
| Eject Force | 380 N |
| Housing Diameter | 18 mm |
| Stroke | 191 mm |
| Mounting points diameter | 17.8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 279.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.50
Important compatibility info
| Weight | 0.3 kg |
| Width | 32 mm |
| Number of Teeth | 147 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 3.14 kg |
| Placement on Vehicle | Rear Axle |
| Length | 261 mm |
| Outer diameter | 128 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 2.0 kg |
| Inner diameter | 233.5 mm |
| Outer diameter | 446 mm |
| Placement on Vehicle | Rear Axle |
| Height | 66 mm |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.196 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 1x Febi Thrust Roller, release fork (35529)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
- 1x Febi Release Fork, clutch (44433)
£34.49
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | both sides |
| Length | 445 mm |
| Housing Diameter | 15 mm |
| Eject Force | 110 N |
| Stroke | 175 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 238 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.266 kg |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Additional Information 2 | without lid |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.52 kg |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.155 kg |
| Inner diameter 2 | 32.19 mm |
| Inner diameter 1 | 19.08 mm |
| Function | Connecting Rod, air compressor |
| Type | Connecting Rod, air compressor |
| Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 1.23 kg |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Width | 27 mm |
| Outer diameter | 125 mm |
| Inner diameter | 70 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.78 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 57 mm |
| Weight | 0.351 kg |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180069)
- 1x Febi Molybdenum Grease (02582)
£34.49
Important compatibility info
| Weight | 0.15 kg |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | with wipe-wash function, with light dimmer function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Outer diameter | 100.7 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front Axle Left, Front, Front Axle Right |
| Weight | 1.268 kg |
| Inner diameter | 16.8 mm |
| Thickness | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.25 kg |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | Left Rear |
| Length | 628 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 256 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 340.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 328 mm |
| Outer diameter | 134 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Weight | 2.58 kg |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| for OE number | 15330-28020 |
| Weight | 0.184 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.060 kg |
| Extra Description | febi Plus |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Cable Length | 157 mm |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Additional Information 2 | with seal ring |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.354 kg |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | transmission sided, Front Axle |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 72 mm |
| Inner diameter 1 | 27 mm |
| Length | 109 mm |
| Joint Type | Tripod Joint |
| Weight | 0.198 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (178828)
- 1x Febi Molybdenum Grease (02582)
£34.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023