Important compatibility info
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Thickness | 18 mm |
| Outer diameter | 172 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Inner diameter | 160 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2845 mm |
| Width | 13 mm |
| Thickness | 10 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| for OE number | 045 903 119 A |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 333 mm |
| Paired article numbers | 49063 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (39602)
- 1x Febi Clamping Clip (38761)
- 1x Febi Clamping Clip (38754)
- 1x Febi Tie Rod End (19342)
- 1x Febi Inner Tie Rod (32597)
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 294 mm |
| Housing Diameter | 19 mm |
| Eject Force | 500 N |
| Stroke | 87 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 173 mm |
| Additional Information | Change interval/date according to gas spring imprint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Housing length | 277 mm |
| Housing Diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Eject Force | 450 N |
| Stroke | 189 mm |
| Length | 540 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 01034 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 802 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Paired article numbers | 24972 |
| Colour | Black |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Exterior Door Handle (24885)
- 1x Febi Lock Cylinder (24976)
Important compatibility info
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 271.5 mm |
| Stroke | 194 mm |
| Mounting points diameter | 17.8 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Placement on Vehicle | both sides |
| Length | 495 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 026 129 589 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front and Rear |
| Thickness | 28 mm |
| Inner diameter | 40 mm |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 165 mm |
| Thickness | 30 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Cable Length | 1045 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 174512 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 167 mm |
| Outer diameter | 71.6 mm |
| Thread Size | M8x1,25 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 44 mm |
| Internal Teeth, wheel side | 19 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 196434 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42.75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Outer diameter | 89 mm |
| Placement on Vehicle | Rear Axle |
| Length | 172 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 335 mm |
| Outer diameter | 174 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Length | 121.2 mm |
| Width | 86.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 130 mm |
| Outer diameter | 71 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | In-Line Filter |
| Width | 55 mm |
| Outer diameter | 55 mm |
| Type | Fuel filter |
| Height | 55 mm |
| Function | Fuel filter |
| Pipe Diameter | 7.89 mm |
| Length | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated |
| Rim Hole Number | 4 -Hole |
| Thickness | 38.3 mm |
| Brake Disc Thickness | 17 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Number of mounting bores | 2 |
| Minimum thickness | 15 mm |
| Outer diameter | 257 mm |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 64 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178068 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Outer diameter | 92.5 mm |
| Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bush Set, axle beam |
| Outer diameter | 22 mm |
| Type | Bush Set, axle beam |
| Additional Information | with sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (21393)
- 1x Febi Nut (21395)
- 2x Febi Bush, steering knuckle (21399)
- 1x Febi Guide Sleeve, axle beam mounting (22652)
- 1x Febi Sleeve, control arm mounting (22653)
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 439 392 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Additional Information 2 | with fastening material, with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100702)
- 1x Febi Rolling Bearing, suspension strut support mount (183292)
- 3x Febi Screw (186445)
- 1x Febi Nut (37805)
Important compatibility info
| Length | 495 mm |
| Outer diameter | 28 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 18 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M24 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 38971 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38968)
- 1x Febi Inner Tie Rod (36505)
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 32 mm |
| Number of Teeth | 147 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Hand Feed Pump |
| Material | PA (polyamide) |
| Type | Hand Feed Pump |
| Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 359 mm |
| Outer diameter | 169 mm |
| Function | Suspension Spring |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 90 °C |
| Outer diameter | 48 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Outer diameter | 106 mm |
| External Teeth, Wheel Side | 38 |
| Seal Diameter | 63 mm |
| Internal Teeth, wheel side | 29 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Cable Length | 1660 mm |
| Resistance | 1185 Ohm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 12379 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 28487; 36358 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (100069)
- 1x Febi Tensioner Guide, oil pump drive chain (109077)
- 1x Febi Rail, oil pump drive chain (109076)
Important compatibility info
| Function | Connecting Cable, side marker light |
| Extra Description | febi Plus |
| Cable Length | 1660 mm. 265 mm |
| Type | Connecting Cable, side marker light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 129.8 mm |
| Width | 63.8 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 177899 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 22 mm |
| Outer diameter | 59 mm |
| Inner diameter | 11 mm |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 9 mm. 25 mm |
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106633 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1610 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump |
| Length | 417 mm |
| Extra Description | febi Plus |
| Type | Oil sump |
| Spanner Size | 17 |
| Additional Information 2 | with bore for oil-level sensor |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































