Important compatibility info
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 40516 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with fastening/mounting material |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27158)
- 1x Febi Inner Tie Rod (27716)
- 1x Febi Bellow, steering (26506)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 43060 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 725 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| for OE number | 34 52 6 869 321 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Outer diameter | 92.5 mm |
| Height | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179460 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179459 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Boost Pressure Control Valve |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 1 |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Front Axle Right, Front Axle Left, Lower |
| Material | Rubber/Metal |
| Thickness | 60 mm |
| Inner diameter | 30.8 mm |
| Mounting points diameter | 14.4 mm. 20.3 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Outer diameter | 70.2 mm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Length | 130 mm |
| Width | 97 mm |
| Function | Oil Cooler, engine oil |
| Thickness | 75 mm |
| Additional Information | with gasket/seal |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 7.5 mm |
| Thickness | 34.3 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| for OE number | 005 153 72 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 69 mm. 75 mm |
| Thickness | 90 mm. 61 mm |
| Inner diameter | 12 mm |
| Function | Bush Set, axle beam |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (43743)
- 2x Febi Bolt, axle beam mounting (26142)
- 2x Febi Nut (14392)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 560 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Type | Deflection/Guide Pulley, V-ribbed belt |
| Mounting points diameter | 10 mm |
| Number of grooves | 10 |
| Width | 40 mm |
| Outer diameter | 95 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178079 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178081 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178080 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| for OE number | 03C 906 051 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, intake air temperature |
| Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | 3/8 " 14 UNF |
| Spanner Size | 24 |
| Number of Connectors / Ports | 3 |
| Type | Pressure Switch, air conditioning |
| Function | Pressure Switch, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Battery Adapter |
| Function | Battery Adapter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 48 mm |
| Function | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182194 |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Paired article numbers | 182193 |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 51 mm |
| Outer diameter | 295 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 05639 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 28293 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 28294 |
| Additional Information | with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 228.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4.2 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Teeth | 24 |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 15 mm |
| Number of Teeth | 126 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Front, Front Axle Left |
| Paired article numbers | 174810 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 255 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 264 mm |
| Thickness | 42.1 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 57 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 16 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 255 mm |
| Thickness | 46.6 mm |
| Brake Disc Thickness | 19.8 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 150 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 18.7 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Length | 116.9 mm |
| Width | 63 mm. 53.2 mm |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| for OE number | 0248.L1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Cable Repair Kit, glow plug |
| Type | Cable Repair Kit, glow plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Force output F | 55 N. 435 N |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Length | 200 mm |
| Width | 37 mm |
| Thickness | 122 mm |
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 103973 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 239 mm |
| Thickness | 33 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Hose |
| Paired article numbers | 185025 |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Length | 338 mm |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 198413 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 56.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 198412 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 56.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Bore Diameter | 30 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 606 mm |
| Min. Length | 370 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































