Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 708 mm |
| Function | Cable Pull, door release |
| Weight | 0.23 kg |
| Paired article numbers | 186185 |
| Type | Cable Pull, door release |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.83
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Weight | 0.18 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.15
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Weight | 0.235 kg |
| Length | 180 mm |
| Height | 71 mm |
| Width | 157 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre |
| Material | Aluminium |
| Outer diameter | 40 mm |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 37799 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.465 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.79
Important compatibility info
| Chemical Properties | not resistant to rapeseed oil |
| Length | 75 mm |
| Height | 53 mm |
| Width | 75 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Type | Fuel filter |
| Function | Fuel filter |
| Weight | 0.064 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.07
Important compatibility info
| Weight | 1.011 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Replaces | 18742 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.67
Important compatibility info
| Weight | 0.203 kg |
| Length | 1990 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.08
Important compatibility info
| Weight | 21.4 kg |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Triangular Control Arm (CV) |
| Pipe Diameter | 46 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Wishbone Angle Measurement | 47 ° |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£224.29
Important compatibility info
| Length | 360 mm |
| Height | 35 mm |
| Width | 245 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Weight | 0.13 kg |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Weight | 0.7 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.25
Important compatibility info
| Weight | 6.8 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 40426 |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Weight | 5.905 kg |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.38
Important compatibility info
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Weight | 1.560 kg |
| Placement on Vehicle | Rear Axle Upper, Rear Axle Left, Rear Axle Right |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rod/Strut, wheel suspension (45999)
- 2x Febi Bolt, control arm (43405)
£29.26
Important compatibility info
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Weight | 0.419 kg |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.13
Important compatibility info
| Inner diameter | 30 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Weight | 0.08 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.66
Important compatibility info
| Height | 98 mm |
| Outer diameter | 83 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Seal Diameter | 71 mm |
| Internal Thread Size | M16 x 1,5 |
| Function | Fuel filter |
| Type | Fuel filter |
| Weight | 0.34 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.85
Important compatibility info
| Type | Bellow, air suspension |
| Weight | 6.2 kg |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Port / Connector type | Voss 232 |
| Thickness | 235 mm. 660 mm |
| Outer diameter | 258 mm. 200 mm |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M22 x 1,5, M16 x 1,5 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.320 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (184288)
- 2x Febi Protective Cap/Bellow, shock absorber (40088)
£17.65
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 420 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 151 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.260 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 184639 |
| Weight | 1.44 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£40.34
Important compatibility info
| Weight | 1.01 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.27
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.65 kg |
| Paired article numbers | 41969 |
| Length | 175 mm |
| Thickness | 80 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.45
Important compatibility info
| Material | Rubber |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.03 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.81
Important compatibility info
| Eject Force | 360 N |
| Stroke | 165 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.225 kg |
| Placement on Vehicle | both sides |
| Length | 465 mm |
| Housing Diameter | 18 mm |
| Housing length | 257.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.27
Important compatibility info
| Weight | 0.045 kg |
| for OE number | 112 018 01 82 |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.59
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Outer, Rear Axle Right |
| Steering arm type | Control Arm |
| Material | Steel |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 14 mm |
| Weight | 0.771 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Type | Valve Guide |
| Function | Valve Guide |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Weight | 0.072 kg |
| Valve type | for inlet valves, for exhaust valves |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.55
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 44947 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Additional Information 2 | with clamps, with steering bellow |
| Weight | 1.28 kg |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28607)
- 1x Febi Tie Rod End (36261)
- 1x Febi Bellow Kit, steering (44797)
£33.50
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Length | 903 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.92
Important compatibility info
| Weight | 2.070 kg |
| for OE number | 11 21 076 73R |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.66
Important compatibility info
| Placement on Vehicle | Upper Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 39 mm. 64 mm |
| Thickness | 60 mm |
| Inner diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Weight | 0.345 kg |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.40
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 2600 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 2675 mm |
| Paired article numbers | 47329 |
| Number of Connectors / Ports | 2 |
| Weight | 0.115 kg |
| Resistance | 1200 Ohm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.70
Important compatibility info
| Weight | 0.2 kg |
| Placement on Vehicle | Rear Axle |
| Material | Steel |
| Outer diameter | 195 mm |
| Thickness | 11.5 mm |
| Inner diameter | 156 mm |
| Surface | Zinc-coated |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.87
Important compatibility info
| Weight | 0.370 kg |
| Inner diameter 1 | 55 mm |
| Function | Charge Air Hose |
| Inner diameter 2 | 46 mm |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler |
| Turbocharger line | Turbocharger to charge air cooler |
| Hose Length | 245 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.09
Important compatibility info
| Weight | 2.05 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (30361)
- 1x Febi Filter, cabin air (11566)
- 1x Febi Fuel filter (26201)
- 4x Febi Spark Plug (13530)
- 1x Febi Screw Plug, oil sump (15374)
£39.40
Important compatibility info
| Switch point to | 0.5 bar |
| Spanner Size | 24 |
| Switch point from | 0.2 bar |
| Function | Oil Pressure Switch |
| Number of Connectors / Ports | 1 |
| Colour | Black |
| Weight | 0.034 kg |
| External Thread Size | M12 x 1,5 |
| Type | Oil Pressure Switch |
| Length | 52 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm. 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 2.130 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 597 mm |
| Max. Length | 597 mm |
| Min. Length | 367 mm |
| Pipe Diameter | 58 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.60
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Length | 230 mm |
| Filter type | Filter Insert |
| Width | 121 mm |
| Height | 62 mm |
| Weight | 0.141 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.46
Important compatibility info
| Weight | 1.216 kg |
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (39936)
- 4x Febi Mounting, stabiliser bar (39933)
- 4x Febi Mounting, stabiliser bar (39934)
£85.25
Important compatibility info
| Weight | 0.170 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Teeth, ABS ring | 45 |
| Inner diameter | 67 mm |
| Outer diameter | 107 mm |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.2 kg |
| Length | 270 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant level |
| External Thread Size | M22 x 1,5 |
| Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.78
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Weight | 0.720 kg |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.77
Important compatibility info
| Weight | 0.485 kg |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (26360)
- 2x Febi Nut (14392)
- 1x Febi Screw (24796)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Washer (39748)
- 1x Febi Nut (32615)
£18.04
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring, with grease cap |
| Weight | 1.09 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 84 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.70
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 187.35 mm |
| Width | 76 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | R90 |
| Weight | 1.980 kg |
| Thickness/Strength 1 | 15.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.02
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 365 mm |
| Diameter | 1 mm |
| Additional Information | with rubber-metal mounts |
| Rod/Strut | Guide Rod |
| Bore Diameter | 40 mm |
| Weight | 3.200 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Hole Spacing | 365 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£47.48
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Length | 73 mm |
| Material | Steel |
| Outer diameter | 24.8 mm. 21 mm. 38 mm |
| Thickness | 75.5 mm |
| Spanner Size | 19 |
| Colour | Grey, Black |
| Thread Length | 23.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.620 kg |
| Internal Thread Size | M12 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.84
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.167 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.65
Important compatibility info
| Material | Copper |
| Outer diameter | 15 mm |
| Thickness | 1 mm |
| Inner diameter | 10 mm |
| Function | Seal Ring, charger |
| Weight | 0.006 kg |
| Type | Seal Ring, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.05
Important compatibility info
| Weight | 0.2 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 85 mm |
| Inner diameter 1 | 45 mm |
| Length | 138 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01608)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38762)
- 1x Febi Screw (02898)
£9.67
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023