Important compatibility info
| Function | Engine Compartment Noise Insulation |
| Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | MN195805 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 44947 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Additional Information 2 | with clamps, with steering bellow |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28607)
- 1x Febi Tie Rod End (36261)
- 1x Febi Bellow Kit, steering (44797)
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Length | 1084 mm |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 221 mm |
| Additional Information 2 | with seal ring |
| Filter type | In-Line Filter, with connection for water sensor |
| Gasket outer diameter | 32.3 mm |
| Gasket inner diameter | 26.5 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 95 mm |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, steering gear |
| Extra Description | febi Plus |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 313 mm |
| Outer diameter | 170 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Breather Valve, fuel tank |
| Function | Breather Valve, fuel tank |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 50 mm |
| Outer diameter | 68 mm |
| Additional Information 2 | with retaining ring |
| Inner diameter | 35 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Inner diameter | 14 mm |
| Additional Information 2 | with ball bearing, with fastening material |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (103054)
- 3x Febi Screw (173425)
- 1x Febi Nut (175160)
- 1x Febi Rolling Bearing, suspension strut support mount (173338)
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 760 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 170892 |
| Number of Connectors / Ports | 2 |
| Resistance | 1370 Ohm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178406 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178407 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Outer diameter | 254 mm |
| Inspection Tag | ECE R90 Approval |
| Thickness/Strength 1 | 5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 630 mm |
| Housing Diameter | 28 mm |
| Eject Force | 620 N |
| Stroke | 230 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 262 mm |
| Thickness | 32 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 50 mm |
| Outer diameter | 80 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 11 mm |
| Placement on Vehicle | frontal sided |
| Rotation Direction | Clockwise rotation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake caliper piston diameter | 66 mm |
| Type | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178211 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178210 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 84 mm |
| Paired article numbers | 176929 |
| Inner diameter | 18 mm |
| Thickness | 126 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Right |
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Centering Diameter | 69 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 10 mm |
| Thickness | 38.4 mm |
| Outer diameter | 250 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, intake air temperature |
| Screw length below head | 25 mm |
| Length | 64 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 202 mm |
| Additional Information | with gasket/seal |
| Inner diameter | 133 mm |
| Height | 265 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | White |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 15722 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 250 mm |
| Function | Cable Repair Kit, tailgate |
| Number of circuits | 8 |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 45 mm |
| Width | 40 mm |
| Outer diameter | 84 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173760)
- 1x Febi Nut, kingpin (174435)
Important compatibility info
| Thread Size | M33x1,5 |
| Internal Teeth, wheel side | 27 |
| External Teeth, Wheel Side | 35 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Cable Length | 400 mm |
| Function | Sensor, coolant temperature |
| Screw length below head | 30 mm |
| External Thread Size | M10 x 1 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 183706 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Driver side |
| Voltage | 12 V |
| Colour | black |
| Number of Connectors / Ports | 3 |
| Outer/Inner Mirror | manually foldable |
| Combi Switch Function | Window Regulator, Mirror Adjustment, Rear power window on/off (child safety lock), Folding/tilting exterior mirrors |
| Control Type | Rocker Actuation, Push Actuation |
| Switch Lighting | yellow |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Extra Description | febi Plus |
| Height | 237 mm |
| Outer diameter | 123 mm |
| Additional Information 2 | with seal ring |
| Function | Oil Filter |
| Gasket inner diameter | 130.5 mm |
| Inner diameter | 40 mm |
| Gasket outer diameter | 137.7 mm |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Repair Kit, glow plug |
| Cable Length | 2600 mm |
| Function | Cable Repair Kit, glow plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 141 |
| Width | 20 mm |
| Type | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 163.1 mm |
| Width | 90.7 mm. 81 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | black |
| Number of Connectors / Ports | 10. 12. 4 |
| for OE number | 84306-0E010 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 538 mm |
| Housing Diameter | 21 mm |
| Eject Force | 450 N |
| Stroke | 218 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Function | Sensor, engine oil level |
| Number of Connectors / Ports | 2 |
| Cable Length | 750 mm |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 48.3 mm |
| Brake Disc Thickness | 12 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Brake Disc |
| Minimum thickness | 10 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air filter kit |
| Function | Air filter kit |
| Length | 303 mm |
| Height | 60 mm |
| Width | 173 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38631)
- 1x Febi Inner Tie Rod (29513)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 169.1 mm |
| Brake System | TRW |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Manufacturer | CITROEN FIAT PEUGEOT |
| Width | 69.1 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
| Number of wear indicators | 1 Per Axle |
| Model | BOXER DUCATO RELAY |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 251 mm |
| Thickness | 40.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Length | 1545 mm |
| Paired article numbers | 171434 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 32.19 mm |
| Inner diameter 1 | 19.08 mm |
| Function | Connecting Rod, air compressor |
| Type | Connecting Rod, air compressor |
| Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 606 mm |
| Outer diameter | 195 mm |
| Inner diameter | 180 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































