Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 6 |
| Voltage | 12 V |
| Height | 84 mm |
| Operating Mode | Electric |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£120.74
Important compatibility info
| Number of Connectors / Ports | 6 |
| Height | 84 mm |
| Voltage | 12 V |
| Function | Throttle body |
| Operating Mode | Electric |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.85
Important compatibility info
| Height | 83 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Tensioner, timing chain |
| Width | 45 mm |
| Length | 55 mm |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.33
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 6 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100992)
- 1x Febi Seal Ring, throttle body (39736)
£108.93
Important compatibility info
| Length | 150 mm |
| Width | 140 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.68
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 92 °C |
| Number of Connectors / Ports | 2 |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.43
Important compatibility info
| for OE number | 038 115 105 C |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.49
Important compatibility info
| Function | Sensor, coolant temperature |
| Number of Connectors / Ports | 2 |
| Colour | Black |
| Spanner Size | 19 |
| External Thread Size | 3/8" - 18 NPTF |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.01
Important compatibility info
| for OE number | 03G 115 105 |
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.93
Important compatibility info
| Material | Rubber/Metal |
| Paired article numbers | 106735 |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| for OE number | 11270-95F0A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.76
Important compatibility info
| Length | 88 mm |
| Width | 58 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Inner diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.83
Important compatibility info
| Piston Diameter | 21.9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.44
Important compatibility info
| Function | Seal, injector holder |
| Inner diameter | 7.3 mm |
| Thickness | 1.5 mm |
| Outer diameter | 16 mm |
| Material | Copper |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.52
Important compatibility info
| Function | Seal, injector holder |
| Outer diameter | 15 mm |
| Thickness | 2 mm |
| Inner diameter | 7.7 mm |
| Material | Copper |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.42
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Wheel Brake Cylinder |
| Paired article numbers | 108024 |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.30
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Number of Teeth | 42 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.92
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Function | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| Sensor Type | Differential Pressure Sensor |
| Type | Sensor, exhaust pressure |
| for OE number | 31293659 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.72
Important compatibility info
| Outer diameter | 153 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 5PK |
| Inner diameter | 14 mm |
| Number of Ribs | 4 |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.94
Important compatibility info
| Mounting points diameter | 9 mm |
| Function | Oil Cooler, engine oil |
| Length | 252 mm |
| Height | 135 mm |
| Width | 148 mm |
| Internal Thread Size | M10 x 1,5 |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£161.11
Important compatibility info
| Inner diameter | 21 mm |
| Function | Camshaft Adjuster |
| Number of Teeth | 38 |
| Height | 35 mm |
| Outer diameter | 98 mm |
| Placement on Vehicle | Intake Side |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£246.99
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.88
Important compatibility info
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Standard Medium Kit |
| Operating Mode | Hydraulic |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 102 |
| Timing Chain Size | G44HCF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.82
Important compatibility info
| Operating Mode | Mechanical |
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.80
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 147 mm |
| Outer diameter | 90 mm |
| Inner diameter | 22 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (102830)
- 1x Febi Axle Bolt, drive shaft (104750)
£118.54
Important compatibility info
| Inner diameter | 70 mm |
| Function | Corrugated Pipe, exhaust system |
| Length | 1 m |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.98
Important compatibility info
| Inner diameter | 80 mm |
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.70
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.58
Important compatibility info
| Type | Shift Cylinder (manual transmission) |
| Number of mounting bores | 2 |
| Function | Shift Cylinder (manual transmission) |
| Internal Thread Size | M10 x 1,5 |
| Outer diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.82
Important compatibility info
| Paired article numbers | 104244 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.09
Important compatibility info
| Function | Air Filter |
| Filter type | Filter Insert |
| Width | 155 mm |
| Length | 300 mm |
| Height | 42 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.09
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Centre, Rear Axle Right |
| Function | Mounting, control/trailing arm |
| Thickness | 64 mm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
| Outer diameter | 60 mm |
| Inner diameter | 12.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.74
Important compatibility info
| Length | 250 mm |
| Height | 125 mm |
| Width | 148 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.31
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 26 mm |
| Outer diameter | 54 mm |
| Placement on Vehicle | Rear, Front Axle |
| Material | Rubber/Metal |
| Width | 41 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.23
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left |
| Length | 2580 mm |
| Paired article numbers | 104527 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2500 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with Thrust Bearing |
| External Thread Size | M40 x 1,5 |
| Length | 226 mm |
| Additional Information 2 | with bearing |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Outer diameter 2 | 60 mm |
| Outer diameter 1 | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (104534)
- 1x Febi Castle Nut (29497)
- 1x Febi Kingpin (29486)
- 1x Febi Repair Kit, kingpin (29768)
- 1x Febi Bush, steering knuckle (35642)
£97.94
Important compatibility info
| Material | Plastic |
| for OE number | 21884469 |
| Opening Pressure | 1.2 bar |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.68
Important compatibility info
| Function | Mounting, stabiliser bar |
| Thickness | 40 mm |
| Inner diameter | 26 mm |
| Outer diameter | 42 mm |
| Material | Rubber |
| Width | 38 mm |
| Length | 42 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.07
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.95
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 23 mm |
| Thickness | 49 mm |
| Outer diameter | 49 mm |
| Material | Rubber |
| Width | 35 mm |
| Length | 53 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.13
Important compatibility info
| Function | Bushing, leaf spring |
| Inner diameter | 14 mm |
| Outer diameter | 65 mm |
| Material | Rubber/Metal |
| Length | 72 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.41
Important compatibility info
| Function | Suspension Strut Support Mount |
| Outer diameter | 52 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle, Lower |
| Type | Suspension Strut Support Mount |
| Height | 27 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.96
Important compatibility info
| Width | 58 mm |
| Length | 76 mm |
| Placement on Vehicle | Rear Axle |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.53
Important compatibility info
| Length | 148.6 mm |
| Type | Spring Shackle |
| Function | Spring Shackle |
| Placement on Vehicle | Rear Axle |
| Width | 64.6 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.17
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.16
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023