Important compatibility info
Inner diameter 2 | 46 mm |
Placement on Vehicle | Rear, Right, Lower |
Material | PE (Polyethylene) |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 1 | 58 mm |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Inner diameter 2 | 54 mm |
Colour | Black |
Function | Charge Air Hose |
Material | PE (Polyethylene) |
Inner diameter 1 | 54 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1107S)
Important compatibility info
Thread Type | with right-hand thread |
Thread Measurement 2 | M20X1.5 |
Thread Measurement 1 | M26X1.5 RHT |
Function | Tie Rod End |
Type | Tie Rod End |
Cone Size | 28.6 mm |
Length | 120 mm |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with left-hand thread, with external thread |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left, inner |
Type | Tie Rod End |
Paired article numbers | FTR4534 |
Important compatibility info
Thread Measurement 1 | M12x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4867 |
Placement on Vehicle | Front Axle Right, outer |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Axle Joint Thread Type | with right-hand thread, with external thread |
Thread Measurement 2 | M12X1.25 |
Length | 149 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 149 mm |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 1 | M12x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 291 mm |
Function | Inner Tie Rod |
Thread Measurement 1 | M16X1.5 |
Axle Joint Length | 291 mm |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Inner diameter 1 | 35 mm |
Inner diameter 2 | 35 mm |
Outer diameter 1 | 60 mm |
Width 1 | 18.5 mm |
Outer diameter 2 | 60 mm |
Width 2 | 18.5 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Code | Gen 0 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 2 |
Inner diameter 1 | 35 mm |
Outer diameter 1 | 136 mm |
Width 1 | 73 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Bearing Code | Gen 1 |
Inner diameter 1 | 48 mm |
Outer diameter 1 | 88 mm |
Width 1 | 46 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Additional Information | with gaskets/seals |
Number of Teeth | 20 |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Number of Seals | 5 |
Number of Holes | 9 |
Water Pump Pulley Diameter | 106 mm |
Impeller Diameter | 134.5 mm |
Height | 91 mm |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Number of Wings | 12 |
Important compatibility info
Mounting Bolt Thread Size | M10x1 |
Placement on Vehicle | Front Axle Left |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Measurement 2 | M10x1 |
Thread Type | with internal thread |
Length 1 | 290 mm |
Length 2 | 560 mm |
Type | Brake Hose |
Function | Brake Hose |
Important compatibility info
Function | Inner Tie Rod |
Thread Size | M14x1.5 |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 294 mm |
Important compatibility info
Function | Slave Cylinder, clutch |
Diameter | 22.2 mm |
Material | Cast Iron |
Type | Slave Cylinder, clutch |
Important compatibility info
Function | Cable Pull, parking brake |
Length 1 | 1755 mm |
Type | Cable Pull, parking brake |
Length 2 | 780 mm |
Placement on Vehicle | Left Rear, Right Rear |
Important compatibility info
Brake System | Brembo |
Wear Warning Contact | excl. wear warning contact |
Height 1 | 81.4 mm |
Width 1 | 135.5 mm |
Thickness/Strength 1 | 16.2 mm |
Number of pads | 4 |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Suspension Strut Support Mount |
Additional Information 2 | without bearing |
Paired article numbers | FSM5515 |
Distance of fastening bolts | 128 mm |
Height | 63 mm |
Type | Suspension Strut Support Mount |
Inner diameter | 15 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Measurement 1 | M16x1.5 |
Function | Tie Rod End |
Type | Tie Rod End |
Length | 197 mm |
Paired article numbers | FTR6257 |
Thread Size | M12X1.5 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023