Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 800 mm |
| Paired article numbers | 38375 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.17
Important compatibility info
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Additional Information 2 | with screw |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Number of Wings | 7 |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.16
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 1660 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 322 mm |
| Outer diameter | 84 mm |
| Spring Design | Coil spring with constant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.16
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, exhaust pressure |
| Material | Plastic |
| Type | Sensor, exhaust pressure |
| Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.16
Important compatibility info
| Opening Temperature | 88 °C |
| Material | Plastic |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.15
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 284 mm |
| Thickness | 26 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.15
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (40171)
- 1x Febi Rolling Bearing, suspension strut support mount (44799)
£32.15
Important compatibility info
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Thickness | 45 mm |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.14
Important compatibility info
| Piston conrod diameter | 8 mm |
| Eject Force | 495 N |
| Stroke | 140 mm |
| Mounting points diameter | 16.5 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 209.5 mm |
| Housing Diameter | 18 mm |
| Length | 372 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Outer |
| Length | 135 mm |
| Thickness | 94 mm |
| Spanner Size | 22 |
| Paired article numbers | 41376 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5, M20 x 1 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.14
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30606 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Material | Steel |
| Switch point from | 0.1 bar |
| Switch point to | 0.5 bar |
| Operating Mode | Hydraulic, Pneumatic |
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Thread Length | 9 mm |
| Number of Connectors / Ports | 2 |
| Function | Pressure Switch |
| External Thread Size | M16 x 1,5 |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39557 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Length | 240 mm |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Stroke | 76 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Placement on Vehicle | Left Rear |
| Function | Gas Spring, boot/cargo area |
| Housing length | 139.5 mm |
| Piston conrod diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176682 |
| Type | Washer Fluid Jet, headlight cleaning |
| Function | Washer Fluid Jet, headlight cleaning |
| Extra Description | febi Plus |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.13
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper, Front |
| Material | Aluminium |
| Outer diameter | 44 mm |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 37796 |
| Rod/Strut | Pull Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.12
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper, Front |
| Material | Aluminium |
| Outer diameter | 44 mm |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 37795 |
| Rod/Strut | Pull Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.12
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right, Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.12
Important compatibility info
| Placement on Vehicle | Right |
| Length | 175 mm |
| Width | 92 mm |
| Thickness | 20 mm |
| Outer/Inner Mirror | Unheated |
| Type | Mirror Glass, wide angle mirror |
| Camber Radius | 300 mm |
| Function | Mirror Glass, wide angle mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.12
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm |
| Thickness | 55.3 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7.3 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Solid |
| Replaces | 08544 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.11
Important compatibility info
| Outer diameter | 27 mm |
| Inner diameter | 6 mm |
| Colour | Brown |
| Function | Seal Set, valve stem |
| Height | 18 mm |
| Type | Seal Set, valve stem |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.11
Important compatibility info
| Length | 180.1 mm |
| Thickness/Strength 1 | 16.8 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | incl. wear warning contact |
| Width | 74.8 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.11
Important compatibility info
| Function | Bush, driver cab suspension |
| Type | Bush, driver cab suspension |
| Material | Rubber/Metal |
| Length | 107 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.11
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 181152 |
| Brake caliper piston diameter | 54 mm |
| Function | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.10
Important compatibility info
| Notches / Holes Number | 1 |
| Type | Exhaust Valve |
| Length | 201.7 mm |
| Valve head diameter | 42 mm |
| Valve stem diameter | 8.975 mm |
| Function | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.10
Important compatibility info
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 85 mm |
| Width of castor bearing surface | 31 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.10
Important compatibility info
| Placement on Vehicle | Right Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 08084 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Lower Front Axle, Left |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Brake Disc Thickness | 9 mm |
| Outer diameter | 260 mm |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 64.1 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 8 mm |
| Thickness | 42 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43050 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43049 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Length | 60 mm |
| Outer diameter | 5.2 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| External Thread Size | M16 x 1,5 |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| Length | 925 mm |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28792)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (09789)
£32.08
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.08
Important compatibility info
| External Thread Size | M30 x 1,5 RHT |
| Internal Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 190 mm |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Function | Tie Rod End |
| Cone Size | 28.6 mm |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.07
Important compatibility info
| Type | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Placement on Vehicle | Right, Upper |
| Function | Roller Guide, sliding door |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 63.7 mm |
| Width | 64.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.06
Important compatibility info
| Length | 105 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.06
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 75 mm |
| Steering arm type | for trailing arm |
| Function | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring, with spacer disc |
| Mounting points diameter | 21 mm |
| Type | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| for OE number | 1376 728 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.06
Important compatibility info
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
| for OE number | 2182.E2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.06
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 660 mm |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.06
Important compatibility info
| Width | 17 mm |
| Number of Teeth | 95 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11156)
- 1x Febi Tensioner Pulley, timing belt (05897)
£32.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 65 mm |
| Thickness | 98 mm |
| Inner diameter | 30 mm |
| Function | Mounting, shock absorber |
| Type | Mounting, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.05
Important compatibility info
| for OE number | 11 15 7 559 528 |
| Hose Length | 490 mm |
| Height | 130 mm |
| Width | 240 mm |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 19 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.05
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.05
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Rated current | 0.41 A |
| Inner thread 1 | M12 x 1,5 mm |
| Type | Solenoid Valve |
| Function | Solenoid Valve |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.05
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.04
Important compatibility info
| Function | Steering Lock |
| Lock System | without lock barrel |
| Number of Connectors / Ports | 8 |
| Control Type | Rotary Operation |
| Type | Steering Lock |
| Additional Information 2 | with switch, with bolts/screws |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Steering Lock (101084)
- 1x Febi Ignition Switch (18646)
- 2x Febi Tear-Off Screw, ignition lock (101007)
£32.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023