Important compatibility info
Weight | 0.848 kg |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Aluminium |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Replaces | 37413 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 835 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.04 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.9 kg |
Placement on Vehicle | Front Axle |
Length | 360 mm |
Function | Suspension Spring |
Wire Diameter | 13.8 mm |
Type | Suspension Spring |
Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Inner diameter | 10 mm |
Mounting points diameter | 10 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Weight | 0.35 kg |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 920 mm |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 830 mm |
Function | Sensor, wheel speed |
Weight | 0.070 kg |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with top, with screw |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Material | Metal |
Outer diameter | 78 mm |
Weight | 0.5 kg |
Width of castor bearing surface | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Outer diameter | 107 mm |
Weight | 0.24 kg |
Spanner Size | 36 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Extra Description | febi Plus |
Height | 312 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.217 kg |
Function | Hose, air supply |
Extra Description | febi Plus |
Type | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1375 mm |
Number of Connectors / Ports | 2 |
Weight | 0.075 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 205 mm |
Spanner Size | 30 |
Paired article numbers | 186129 |
Weight | 0.122 kg |
Internal Thread Size | M20 x 1,5 |
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Repair Set, boot lid |
Number of circuits | 9 |
Cable Length | 600 mm |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 105 mm |
Outer diameter | 42 mm |
Function | Joint, propshaft |
Weight | 1.51 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.300 kg |
Placement on Vehicle | Wheel Side |
Length | 160 mm |
Outer diameter | 89 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 58 mm |
Internal Teeth, wheel side | 25 |
Number of Teeth, ABS ring | 48 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided, Wheel Side |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Internal Teeth, wheel side | 21 |
Weight | 1.726 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 99 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 394 mm |
Outer diameter | 138 mm |
Weight | 2.01 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 75 mm |
Cone Size | 32 mm |
Weight | 1.8 kg |
Thickness | 127 mm |
Thread Type | with right-hand thread |
External Thread Size | M27 x 1,5 |
Internal Thread Size | M26 x 1,5 RHT |
Extra Description | ProKit |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.177 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 25 mm |
Material | Thermoplastic polyester elastomer |
Length | 105 mm |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Function | Repair Kit, brake camshaft |
Weight | 0.95 kg |
Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (07479)
- 2x Febi Holder, brake camshaft seal ring (07480)
- 1x Febi Holder, brake camshaft seal ring (08472)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Stop Plate, adjuster (07483)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Spacer, brake shaft (07486)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07491)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
Important compatibility info
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Length | 351 mm |
Function | Suspension Spring |
Outer diameter | 152 mm |
Weight | 2.48 kg |
Wire Diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Number of Coils | 5.8 |
Outer diameter | 144 mm |
Length | 244 mm |
Placement on Vehicle | Rear Axle |
Type | Suspension Spring |
Weight | 2.63 kg |
Wire Diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023