Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 353 mm |
| Outer diameter | 110 mm |
| Weight | 2.379 kg |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.80
Important compatibility info
| Weight | 0.064 kg |
| Placement on Vehicle | Right |
| Paired article numbers | 176682 |
| Type | Washer Fluid Jet, headlight cleaning |
| Function | Washer Fluid Jet, headlight cleaning |
| Extra Description | febi Plus |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.79
Important compatibility info
| Weight | 2.37 kg |
| Wire Diameter | 12.3 mm |
| Placement on Vehicle | Front Axle |
| Length | 366 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.79
Important compatibility info
| Weight | 0.224 kg |
| Additional Information | with bush |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1185 Ohm |
| Cable Length | 3440 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.79
Important compatibility info
| Length | 185 mm |
| Height | 158 mm |
| Width | 98.5 mm |
| Additional Information | with gasket/seal |
| Additional Information 2 | with filter |
| Filter type | with water drain screw |
| Weight | 0.48 kg |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.79
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M20 x 1,5 |
| Paired article numbers | 186128 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 1.122 kg |
| Spanner Size | 30 |
| Placement on Vehicle | Front Axle Right |
| Length | 205 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Weight | 0.262 kg |
| Placement on Vehicle | both sides |
| Length | 560 mm |
| Housing Diameter | 18 mm |
| Eject Force | 290 N |
| Stroke | 221 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing length | 305.5 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Weight | 0.217 kg |
| Placement on Vehicle | both sides |
| Length | 450 mm |
| Housing Diameter | 18 mm |
| Eject Force | 455 N |
| Stroke | 144 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Weight | 0.300 kg |
| Function | Expansion Tank, coolant |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| for OE number | 2 066 919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Rotor Style | Solid |
| Weight | 2.94 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 33.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.78
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.004 kg |
| Type | Water Pump, engine cooling |
| Replaces | 17013 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.77
Important compatibility info
| Weight | 2.8 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39557 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.77
Important compatibility info
| Function | Sensor, pneumatic suspension level |
| Inner diameter | 11.5 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.121 kg |
| Internal Thread Size | M6 x 1 |
| Type | Sensor, pneumatic suspension level |
| Hole Spacing | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.77
Important compatibility info
| Weight | 2.8 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39558 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.77
Important compatibility info
| Function | Air Dryer Cartridge, compressed-air system |
| Height | 176 mm |
| Outer diameter | 136 mm |
| Internal Thread Size | M39 x 1,5 |
| Additional Information 2 | with integrated oil separator, with seal ring |
| Type | Air Dryer Cartridge, compressed-air system |
| Weight | 2.3 kg |
| Spanner Size | 30 |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Weight | 1.352 kg |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.75
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Weight | 0.35 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.75
Important compatibility info
| Weight | 0.116 kg |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1875 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.74
Important compatibility info
| Weight | 0.1 kg |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 26042 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.74
Important compatibility info
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Cable Length | 1850 mm |
| Paired article numbers | 172425 |
| Number of Connectors / Ports | 2 |
| Weight | 0.181 kg |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.73
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 0.774 kg |
| for OE number | GS1G-39-040A |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.72
Important compatibility info
| Additional Information | without coolant level sensor |
| Weight | 0.52 kg |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | LR 004080 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.71
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Weight | 0.141 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Return Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.71
Important compatibility info
| Weight | 0.15 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 54 |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.71
Important compatibility info
| Thickness | 98 mm |
| Paired article numbers | 47934 |
| Placement on Vehicle | Front Axle Left |
| Length | 432 mm |
| Weight | 1.3 kg |
| Additional Information 2 | with clamps, with steering bellow |
| Function | Tie Rod |
| Width | 52 mm |
| Extra Description | ProKit |
| Type | Tie Rod |
| External Thread Size | M16 x 1,5, M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (47931)
- 1x Febi Bellow Kit, steering (39833)
£31.71
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.899 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | both sides, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.70
Important compatibility info
| Function | Actuator, headlight levelling |
| Operating Mode | Electric |
| Placement on Vehicle | both sides |
| Weight | 0.06 kg |
| Extra Description | febi Plus |
| Type | Actuator, headlight levelling |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.70
Important compatibility info
| Function | Pump, fuel pre-supply |
| Weight | 0.32 kg |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
| Additional Information 2 | with filter |
| Length | 105 mm |
| Height | 102 mm |
| Width | 75.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.68
Important compatibility info
| Length | 1000 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.67
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | with retaining ring |
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Weight | 2.725 kg |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.67
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 106 |
| Timing Chain Size | G44HCF |
| Function | Timing Chain |
| Weight | 0.194 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.66
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 214 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Weight | 3.080 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.66
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.194 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G44HCF |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.66
Important compatibility info
| Weight | 0.603 kg |
| Type | Tensioner Pulley, timing belt |
| Outer diameter | 68 mm |
| Function | Tensioner Pulley, timing belt |
| Width | 41 mm |
| Width of castor bearing surface | 30 mm |
| Replaces | 193644 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.66
Important compatibility info
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Weight | 0.25 kg |
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Outer diameter | 36 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.66
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 129 mm |
| Material | Steel |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.38 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.65
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 26 mm |
| Outer diameter | 190 mm |
| Weight | 0.8 kg |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.64
Important compatibility info
| Weight | 0.234 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (34288)
- 2x Febi Rubber Buffer, suspension (26177)
£31.64
Important compatibility info
| Placement on Vehicle | Outer, Rear Axle |
| Weight | 0.419 kg |
| Thickness | 20 mm |
| Inner diameter | 130 mm |
| Function | Shaft Seal, wheel hub |
| Outer diameter | 170 mm |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.64
Important compatibility info
| Additional Information 2 | with top, with screw |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Outer diameter | 78 mm |
| Weight | 0.5 kg |
| Width of castor bearing surface | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.64
Important compatibility info
| Function | Cable Pull, parking brake |
| Weight | 1.150 kg |
| Placement on Vehicle | Rear |
| Length | 1585 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.64
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
| Additional Information 2 | with bolts/screws |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 92 mm |
| Inner diameter | 18 mm |
| Weight | 1.28 kg |
| Type | Bush Set, axle beam |
| Function | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (32554)
- 2x Febi Screw (32637)
£31.64
Important compatibility info
| Weight | 2.24 kg |
| Placement on Vehicle | Front Axle |
| Length | 169.2 mm |
| Width | 61.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.2 mm |
| Function | Brake Pad Set, disc brake |
| Number of wear indicators | 1 Per Axle |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.64
Important compatibility info
| Weight | 3.8 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 34.9 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.62
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 320 mm |
| Weight | 0.2 kg |
| Housing Diameter | 19 mm |
| Eject Force | 410 N |
| Stroke | 113 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 180.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.62
Important compatibility info
| Extra Description | febi Plus |
| Length | 57 mm |
| Weight | 0.02 kg |
| Type | Regulating Valve, oil pressure |
| Function | Regulating Valve, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.62
Important compatibility info
| Weight | 3.9 kg |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 41.1 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.62
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Material | Rubber/Metal |
| Outer diameter | 73.5 mm |
| Thickness | 85 mm |
| Inner diameter | 17 mm |
| Weight | 0.325 kg |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
Important compatibility info
| Weight | 0.075 kg |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 625 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
Important compatibility info
| Weight | 1.114 kg |
| Placement on Vehicle | Left Rear |
| Width | 115 mm |
| Thickness | 85 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Outer Length | 115 mm |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023