Proud to be a UK-based company
Contact us
Important compatibility info
| Current Strength | 120 A |
| Belt Pulley Diameter | 60 mm |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.44
Important compatibility info
| Additional Information 2 | with nut |
| Bore Diameter | 8.5 mm |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| External Teeth, Wheel Side | 25 |
| Number of mounting bores | 6 |
| Wheel Sided Joint Diameter | 98.3 mm |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 515 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.44
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 715 mm |
| Min. Length | 438 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 664 mm |
| Min. Length | 410 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Mounting points diameter | 26 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.15
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Belt Pulley Diameter | 119 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 115 ml |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£177.00
Important compatibility info
| Function | Fuel Feed Unit |
| Outer diameter | 108 mm |
| Number of Connectors / Ports | 4 |
| Type | Fuel Feed Unit |
| Additional Information | with fuel sender unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.97
Important compatibility info
| Housing material | Aluminium |
| Number of grooves | 8 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.94
Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.94
Important compatibility info
| Fill Medium | Brake Fluid |
| Type | Clutch Booster |
| Function | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.94
Important compatibility info
| Function | Interior Blower |
| Type | Interior Blower |
| Number of Connectors / Ports | 6 |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.94
Important compatibility info
| Placement on Vehicle | Front |
| Length | 655 mm |
| Multi-piece | one-piece |
| Type | Propshaft, axle drive |
| Function | Propshaft, axle drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.94
Important compatibility info
| Extra Description | febi Plus |
| Length | 250 mm |
| Width | 250 mm |
| Thickness | 100 mm |
| Operating Mode | Electric |
| Function | Mechatronics, automatic transmission |
| Type | Mechatronics, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.91
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.91
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (17467)
- 1x Febi Coolant Pipe (48752)
- 1x Febi Seal Ring, water pump (49087)
- 1x Febi Seal Ring, water pump (49086)
£176.91
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.91
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 594 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.84
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 798 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.84
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Voltage | 12 V |
| Number of Connectors / Ports | 5 |
| Cable Length | 890 mm |
| Type | NOx Sensor, urea injection |
| Function | NOx Sensor, urea injection |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.79
Important compatibility info
| Mounting points diameter | 16 mm. 20 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 683 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Min. Length | 418 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.78
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Paired article numbers | 192763 |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 345 mm |
| Min. Length | 230 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Extra Description | febi Plus |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£176.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023