Important compatibility info
Length | 92.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Weight | 0.920 kg |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Additional Information 2 | with fastening material |
Width | 46.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.032 kg |
Function | Flasher Unit |
Voltage | 12 V |
Operating Mode | Electronic |
Number of Connectors / Ports | 3 |
Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
Additional Information | with bush |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1550 mm |
Number of Connectors / Ports | 2 |
Resistance | 1250 Ohm |
Cable Length | 1400 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 26 mm |
Weight | 0.225 kg |
Material | Plastic |
Outer diameter | 81 mm |
Number of Ribs | 6 |
Outer diameter 2 | 76 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Inner diameter | 17 mm |
Mounting points diameter | 17 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Material | Metal |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 11 28 2 247 435 |
Width of castor bearing surface | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Weight | 0.175 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Brake Hose |
Length | 702 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 1 | 41 mm |
Width | 20 mm |
Type | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Outer diameter | 78 mm |
Inner diameter | 45 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width 1 | 18 mm |
Outer diameter 1 | 68 mm |
Weight | 1.020 kg |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.72 kg |
Placement on Vehicle | Front Axle |
Length | 124.6 mm |
Width | 70.6 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.46 kg |
Placement on Vehicle | Front Axle Right, Upper, Rear |
Steering arm type | Control Arm |
Paired article numbers | 36602 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Cone Size | 16 mm |
Cone Size 1 | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.862 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.46 kg |
Placement on Vehicle | Front Axle Left, Upper, Rear |
Steering arm type | Control Arm |
Paired article numbers | 36603 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 16 mm |
Cone Size 1 | 13 mm |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height 1 | 16 mm |
Length | 140 mm |
Width | 150 mm |
Material | Rubber/Metal |
Outer diameter | 45 mm |
Inner diameter | 14 mm |
Paired article numbers | 36615 |
Length 4 | 70 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Weight | 1.05 kg |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.512 kg |
Length | 202 mm |
Inner diameter | 50 mm |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Hole Spacing | 182 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171932)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Material | Cast Aluminium |
Seal Material | Rubber |
Number of Teeth | 19 |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Weight | 0.767 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 36881 |
Steering arm type | Control Arm |
Weight | 2.60 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket Set, cylinder head cover |
Function | Gasket Set, cylinder head cover |
Weight | 0.052 kg |
Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (174030)
- 1x Febi Gasket, cylinder head cover (174032)
- 1x Febi Gasket, cylinder head cover (174033)
Important compatibility info
Height | 73 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Weight | 0.225 kg |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Width | 48 mm |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Function | Glow Plug |
External Thread Size | M10 x 1 |
Length | 90 mm |
Voltage | 11 V |
Spanner Size | 10 |
Weight | 0.03 kg |
Fitting Depth | 29.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Weight | 0.684 kg |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.570 kg |
Placement on Vehicle | Front Axle |
Length | 188 mm |
Width | 73.3 mm. 80.7 mm |
Brake System | Lucas |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Upper, Rear Axle Left, Rear Axle Right |
Material | Steel |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Weight | 0.911 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.788 kg |
Placement on Vehicle | Rear Axle Left, Centre, Rear Axle Right |
Material | Steel |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Length | 219 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tie Rod End |
Cone Size 2 | 18 mm |
Cone Size 1 | 15 mm |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Function | Tie Rod End |
Paired article numbers | 48200 |
Weight | 0.796 kg |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.580 kg |
Manufacturer | NISSAN |
Placement on Vehicle | Front Axle |
Length | 137.2 mm |
Width | 54.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Model | JUKE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.440 kg |
Outer diameter | 136 mm |
Thickness | 163 mm |
Colour | Black |
Thread Type | with left-hand thread |
Function | Air Dryer Cartridge, compressed-air system |
Internal Thread Size | M39 x 1,5 |
Type | Air Dryer Cartridge, compressed-air system |
Additional Information 2 | with integrated oil separator, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 2.24 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 108899 |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.323 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 37861 |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18733)
- 1x Febi Washer (37852)
- 1x Febi Washer (37853)
- 1x Febi Nut (05359)
- 3x Febi Pulley Bolt (33780)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Weight | 0.059 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1255 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 45 mm |
Function | Suspension, propshaft |
Weight | 2.396 kg |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (18822)
- 1x Febi Bearing, propshaft centre bearing (18824)
Important compatibility info
Weight | 1.314 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 37871 |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18734)
- 1x Febi Washer (37852)
- 1x Febi Washer (37853)
- 1x Febi Nut (05359)
- 3x Febi Pulley Bolt (33780)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Weight | 1.645 kg |
Placement on Vehicle | Front Axle |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Length | 139 mm |
Width | 80 mm |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.24 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 108898 |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Filter type | Filter Insert |
Length | 253 mm |
Height | 232 mm |
Width | 126 mm |
Weight | 0.3 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 333 mm |
Weight | 1.604 kg |
Outer diameter 1 | 86 mm |
Outer diameter 2 | 108 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Cable Length | 635 mm |
Weight | 0.043 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Inner diameter | 17 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Material | Metal |
Weight | 0.190 kg |
Width of castor bearing surface | 32 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Replaces | 49682 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Opening Temperature | 88 °C |
Function | Thermostat, coolant |
Weight | 0.26 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.818 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 181248 |
Number of Connectors / Ports | 2 |
Weight | 0.090 kg |
Cable Length | 920 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 0.736 kg |
Placement on Vehicle | Lower, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 352 mm |
Filter type | Filter Insert |
Function | Air Filter |
Height | 113 mm |
Width | 293 mm |
Type | Air Filter |
Weight | 0.748 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.131 kg |
for OE number | 32 41 1 094 306 |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Placement on Vehicle | from fluid reservoir to hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide) |
Cooling Hose | from engine to thermostat |
Type | Coolant Pipe |
Function | Coolant Pipe |
Extra Description | febi Plus |
Weight | 0.322 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 594 mm |
Weight | 0.049 kg |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.683 kg |
Placement on Vehicle | Front Axle Right, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 33367 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21906)
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 33368 |
Weight | 0.685 kg |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21904)
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Weight | 0.051 kg |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Right |
Length | 5630 mm |
Additional Information | with bush |
Paired article numbers | 103764 |
Number of Connectors / Ports | 2 |
Weight | 0.189 kg |
Resistance | 1150 Ohm |
Cable Length | 5520 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with bush |
Resistance | 1185 Ohm |
Cable Length | 1420 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Weight | 0.103 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023