Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 14 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 643 mm |
| Housing Diameter | 18 mm |
| Eject Force | 475 N |
| Stroke | 204 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 375 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper, Rear |
| Steering arm type | Control Arm |
| Paired article numbers | 36602 |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Cone Size | 16 mm |
| Cone Size 1 | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Steering arm type | Control Arm |
| Paired article numbers | 36603 |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Cone Size 1 | 13 mm |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 45 mm |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 85 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter 1 | 82 mm |
| Inner diameter 1 | 43 mm |
| Width | 40 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (26376)
- 1x Febi Screw (29748)
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
Important compatibility info
| Function | Gas Spring, bonnet |
| Housing length | 357 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Stroke | 266 mm |
| Housing Diameter | 18 mm |
| Eject Force | 290 N |
| Length | 649 mm |
| Type | Gas Spring, bonnet |
| Placement on Vehicle | Left, Right |
| Replaces | 30878; 37084 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 368.5 mm |
| Placement on Vehicle | both sides |
| Length | 686 mm |
| Housing Diameter | 22 mm |
| Eject Force | 500 N |
| Stroke | 295 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, bonnet |
| Replaces | 26356 |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 264 mm |
| Min. Length | 208 mm |
| Pipe Diameter | 54 mm. 45 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Outer, Rear, Rear Axle Left, Lower, Rear Axle Right |
| Outer diameter | 40 mm |
| Thickness | 50 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 235 mm |
| Material | Steel |
| Spanner Size | 14 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 65 mm |
| Inner diameter | 55 mm |
| Colour | Black |
| Function | Radiator Hose |
| Wall Thickness | 5 mm |
| Hose Length | 622 mm |
| Type | Radiator Hose |
| for OE number | 1 496 815 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 11.8 mm |
| Placement on Vehicle | Rear Axle |
| Length | 358 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Outer diameter | 156 mm |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 374 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Cast Aluminium |
| Outer diameter | 131 mm |
| Function | Suspension Strut Support Mount |
| Inner diameter | 30 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from expansion tank to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 30 mm |
| Paired article numbers | 102670 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Height | 41.06 mm |
| Length | 268 mm |
| Placement on Vehicle | Front Axle Left, Upper, Front |
| Additional Information 2 | with rubber mount, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 30 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 102669 |
| Material | Aluminium |
| Height | 41.06 mm |
| Length | 268 mm |
| Placement on Vehicle | Front Axle Right, Upper, Front |
| Additional Information 2 | with ball joint, with rubber mount |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 50 mm |
| Inner diameter 2 | 55 mm |
| Outer diameter 1 | 90 mm |
| Width 1 | 24.8 mm |
| Outer diameter 2 | 90 mm |
| Width 2 | 23 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (19780)
- 1x Febi Wheel Bearing (19769)
- 1x Febi Shaft Seal, wheel hub (37459)
Important compatibility info
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 109 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 56 mm |
| Voltage from | 10 V |
| Light Distribution | Long-range illumination |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R10, R23 |
| Lumen | 2000 lm |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Additional Information | with fastening/mounting material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















