Important compatibility info
Function | Belt Pulley, crankshaft |
Width | 73 mm |
Outer diameter | 153 mm |
Weight | 2.655 kg |
Inner diameter | 32 mm |
Number of Ribs | 6 |
Parameter | 7PK |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.700 kg |
for OE number | 51.08101.6331 |
Mounting points diameter | 12 mm |
Type | Manifold, exhaust system |
Function | Manifold, exhaust system |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.715 kg |
Function | Throttle body |
Number of Connectors / Ports | 4 |
Operating Mode | Electric |
Voltage | 12 V |
Height | 73 mm |
Additional Information | with gasket/seal |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 16.4 kg |
Placement on Vehicle | Rear Axle |
Length | 625 mm |
Steering arm type | Triangular Control Arm (CV) |
Pipe Diameter | 46 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Wishbone Angle Measurement | 49 ° |
for OE number | 960 350 34 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Weight | 18.7 kg |
Length | 1800 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 62 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Water Recirculation Pump, parking heater |
Operating Mode | Electric |
Weight | 0.32 kg |
Type | Water Recirculation Pump, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.188 kg |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Number of Connectors / Ports | 6 |
Type | Mass Air Flow Sensor |
for OE number | 82 00 280 065 |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber |
Type | Shock Absorber |
Max. Length | 750 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 462 mm |
Placement on Vehicle | Front Axle |
Pipe Diameter | 63.5 mm. 55 mm |
Shock Absorber Type | Oil Pressure |
Mounting points diameter | 16 mm |
Weight | 4.4 kg |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Left |
Weight | 8.276 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 150 A |
Belt Pulley Diameter | 53 mm |
Weight | 6.39 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023