Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right, Front |
| Internal Thread Size | M12 x 1,25 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Front, Rear Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Number of Wings | 10 |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Diameter 1 | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 138 mm |
| Outer diameter | 85 mm |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 58 mm |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 35 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 106345 |
| Number of Connectors / Ports | 2 |
| Cable Length | 560 mm |
| Function | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Washer Fluid Pump, window cleaning |
| Pump Type | Mono Pump |
| Number of Connectors / Ports | 2 |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 40.4 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.2 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
| Replaces | 43818 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right, Centre |
| Function | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 69 mm |
| Width | 72.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.6 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 101.8 mm |
| Width | 79.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Exterior Door Handle |
| Material | Plastic |
| Paired article numbers | 24973 |
| Colour | Black |
| Placement on Vehicle | Left |
| Type | Exterior Door Handle |
| Lock System | with lock barrel, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Exterior Door Handle (24886)
- 1x Febi Lock Cylinder (24976)
Important compatibility info
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 368.5 mm |
| Placement on Vehicle | both sides |
| Length | 686 mm |
| Housing Diameter | 22 mm |
| Eject Force | 500 N |
| Stroke | 295 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, bonnet |
| Replaces | 26356 |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Outer diameter | 180 mm |
| Inner diameter | 150 mm |
| Placement on Vehicle | transmission sided |
| Width | 15 mm |
| Material | ACM (Polyacrylate) |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| for OE number | 11 12 8 515 732 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | NISSAN |
| Placement on Vehicle | Front Axle |
| Length | 137.2 mm |
| Width | 54.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Model | JUKE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Width | 54 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 90 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 55 mm |
| Replaces | 44776 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















