Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 87 mm |
| Joint Type | CV Joint |
| Length | 126 mm |
| Material | Thermoplastic polyester elastomer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184713)
- 1x Febi Molybdenum Grease (02582)
£28.51
Important compatibility info
| External Teeth, Wheel Side | 21 |
| Internal Teeth, wheel side | 20 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| ABS Ring Diameter | 90 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Number of Teeth, ABS ring | 48 |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.51
Important compatibility info
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (18822)
- 1x Febi Bearing, propshaft centre bearing (18824)
£28.50
Important compatibility info
| Wire Diameter | 12.3 mm |
| Placement on Vehicle | Front Axle |
| Length | 362 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Outer diameter | 149 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.50
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Suspension Spring |
| Length | 187 mm |
| Outer diameter | 144 mm |
| Wire Diameter | 16 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1255 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.50
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 108898 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.50
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Plastic |
| Outer diameter | 81 mm |
| Number of Ribs | 6 |
| Outer diameter 2 | 76 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.49
Important compatibility info
| Width | 66.9 mm. 72.1 mm |
| Thickness/Strength 1 | 17.1 mm. 17.9 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm. 155 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
£28.48
Important compatibility info
| Length | 325 mm |
| Function | Hydraulic Hose, steering |
| Placement on Vehicle | from steering gear to fluid reservoir |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.48
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Lower, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.48
Important compatibility info
| Housing length | 369.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 172 mm |
| Eject Force | 540 N |
| Housing Diameter | 18 mm |
| Length | 661 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.48
Important compatibility info
| Type | Control, swirl flaps (induction pipe) |
| Operating Mode | Electric-pneumatic |
| Function | Control, swirl flaps (induction pipe) |
| Valve type | Switch Valve |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Fault Code(s) | P2008 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.48
Important compatibility info
| Width | 29 mm |
| Outer diameter | 130 mm |
| Inner diameter | 85 mm |
| Bearing Type | Tapered Roller Bearing |
| Placement on Vehicle | Rear Axle |
| Type | Bearing / Wheel Bearing |
| Function | Bearing / Wheel Bearing |
| Bearing Code | 32017XA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.47
Important compatibility info
| Function | Repair Kit, tilt pump |
| Type | Repair Kit, tilt pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.47
Important compatibility info
| Height | 452 mm |
| Outer diameter | 181 mm |
| Inner diameter | 152 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.47
Important compatibility info
| Number of Teeth | 27 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.46
Important compatibility info
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 79 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 12 mm |
| Outer diameter | 70 mm |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.46
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 55559246 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.46
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (174030)
- 1x Febi Gasket, cylinder head cover (174032)
- 1x Febi Gasket, cylinder head cover (174033)
£28.46
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 33367 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21906)
£28.45
Important compatibility info
| Height | 73 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.45
Important compatibility info
| Outer diameter | 60 mm |
| Material | Metal |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.44
Important compatibility info
| Thickness | 88 mm |
| Inner diameter | 21.2 mm |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear, outer, Rear Axle Right |
| Outer diameter | 88.6 mm |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 37861 |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18733)
- 1x Febi Washer (37852)
- 1x Febi Washer (37853)
- 1x Febi Nut (05359)
- 3x Febi Pulley Bolt (33780)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£28.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 37871 |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (18734)
- 1x Febi Washer (37852)
- 1x Febi Washer (37853)
- 1x Febi Nut (05359)
- 3x Febi Pulley Bolt (33780)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£28.42
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Steel |
| Outer diameter | 32 mm |
| Thickness | 36 mm |
| Spanner Size | 17, 19 |
| Surface | Zink flake coated |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10 |
| Wheel Fastening | Flat Seat |
| Function | Wheel Nut |
| Internal Thread Size | M14 x 1,5 |
| Type | Wheel Nut |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.42
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Additional Information | with holder |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Width | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023