Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 328 mm |
| Weight | 1.668 kg |
| Outer diameter 1 | 83 mm |
| Outer diameter 2 | 89 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.0 kg |
| Internal Teeth, wheel side | 24 |
| Seal Diameter | 53.5 mm |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 84.5 mm |
| Length | 157 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.60
Important compatibility info
| Weight | 1.459 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 32, 15 |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
| for OE number | 09 20 007 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44446)
- 1x Febi Tie Rod End (41947)
- 1x Febi Bellow, steering (39602)
£28.59
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Weight | 0.641 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Weight | 1.303 kg |
| Paired article numbers | 173477 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Inner diameter | 16 mm |
| Function | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Type | Hydraulic Hose, steering |
| Outer diameter | 24 mm |
| Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.59
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Weight | 0.54 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Weight | 1.726 kg |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20 mm |
| Width | 74.8 mm |
| Length | 109.8 mm |
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Weight | 0.578 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Weight | 0.5 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Cast Aluminium |
| Outer diameter | 131 mm |
| Weight | 0.54 kg |
| Function | Suspension Strut Support Mount |
| Inner diameter | 30 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.58
Important compatibility info
| Weight | 0.151 kg |
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1035 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 109726 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.57
Important compatibility info
| Function | Slave Cylinder, clutch |
| Weight | 0.150 kg |
| Type | Slave Cylinder, clutch |
| for OE number | 2182.16 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Weight | 0.77 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 131 mm |
| Material | Rubber/Metal |
| Paired article numbers | 104215 |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Height | 65 mm |
| Width | 119 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Paired article numbers | 104542 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Length | 3665 mm |
| Cable Length | 3585 mm |
| Weight | 0.148 kg |
| Placement on Vehicle | Rear Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Material | Metal |
| Outer diameter | 34 mm |
| Operating Mode | Automatic |
| Weight | 0.293 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.56
Important compatibility info
| Weight | 0.214 kg |
| Replaces | 21998; 31943 |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 0.089 kg |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1400 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 1380 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Front Axle |
| Length | 374 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.55
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023