Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 689 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 109418 |
Number of Connectors / Ports | 2 |
Cable Length | 590 mm |
Function | Sensor, wheel speed |
Weight | 0.088 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 741 mm |
Function | Sensor, wheel speed |
Weight | 0.045 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.333 kg |
Number of Teeth | 20 |
Engine Management | Timing Chain |
Type | Sprocket, crankshaft |
Function | Sprocket, crankshaft |
Width | 48 mm |
Outer diameter | 63 mm |
Inner diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Material | Plastic |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 91 °C |
Function | Thermostat, coolant |
Weight | 0.213 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Length | 72 mm |
Width | 100 mm |
Thickness | 100 mm |
Function | Coolant Control Valve |
for OE number | 1J0 819 809 |
Extra Description | febi Plus |
Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Number of Connectors / Ports | 2 |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.69 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1 699 249 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Width | 25 mm |
Number of Teeth | 153 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.422 kg |
Material | Aluminium |
Thickness | 63 mm |
Spanner Size | 18 |
Paired article numbers | 39601 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Length | 325 mm |
Placement on Vehicle | Front Axle Right |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (39588)
- 2x Febi Nut, stabiliser bar (22264)
Important compatibility info
Width | 26.5 mm |
Material | Plastic |
Outer diameter | 81 mm |
Number of Ribs | 6 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.235 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 325 mm |
Material | Aluminium |
Thickness | 63 mm |
Spanner Size | 18 |
Paired article numbers | 39600 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Weight | 0.422 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (39589)
- 2x Febi Nut, stabiliser bar (22264)
Important compatibility info
Weight | 0.370 kg |
Function | Tensioner, timing chain |
for OE number | 1 406 306 |
Type | Tensioner, timing chain |
Operating Mode | Hydraulic |
Additional Information
Technical Information
The correct chain tensioner has to be ascertained by the vehicle manufacturer using the VIN and looking up the according service manual.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | End Outline Marker Light |
Light Design | LED |
Mounting bores distance | 78 mm |
Cable Length | 500 mm |
Inspection Tag | EMC |
Length | 173 mm |
Placement on Vehicle | Left |
Protection Type (IP Code) | IP67 |
Voltage from | 12 V |
Voltage to | 24 V |
Function | End Outline Marker Light |
Fulfils ECE norm | R10, R7, R91 |
Port / Connector type | PRS |
Weight | 0.195 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 453.5 mm |
Weight | 0.604 kg |
Placement on Vehicle | Left Rear |
Length | 671 mm |
Housing Diameter | 22 mm |
Eject Force | 750 N |
Stroke | 188 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | End Outline Marker Light |
Placement on Vehicle | Right |
Length | 173 mm |
Voltage to | 24 V |
Voltage from | 12 V |
Cable Length | 500 mm |
Type | End Outline Marker Light |
Light Design | LED |
Mounting bores distance | 78 mm |
Weight | 0.195 kg |
Port / Connector type | PRS |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R10, R7, R91 |
Inspection Tag | EMC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 232 mm |
Outer diameter | 108 mm |
Filter type | Spin-on Filter |
Seal Diameter | 103 mm |
Function | Fuel filter |
Weight | 0.450 kg |
Internal Thread Size | 1/1" - 14 UNS |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Paired article numbers | 104216 |
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Length | 131 mm |
Type | Repair Kit, suspension strut support mount |
Height | 65 mm |
Width | 119 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 12 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1890 mm |
Weight | 0.376 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, oil pressure |
Type | Sensor, oil pressure |
Weight | 0.060 kg |
Number of Connectors / Ports | 3 |
for OE number | 007 153 08 28 |
Spanner Size | 27 |
Shifting Points | 5 bar |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 1908 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 485 mm |
Weight | 0.2 kg |
Housing Diameter | 19 mm |
Eject Force | 645 N |
Stroke | 152 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 257 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 660 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 20 mm |
Bearing/Mounting Type | Hydro Mount |
Material | Rubber/Metal |
Outer diameter | 80 mm |
Weight | 0.60 kg |
Function | Bushing, axle beam |
Thickness | 68 mm |
Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Paired article numbers | 39042 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10660)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.110 kg |
Length | 79.85 mm |
Outer diameter | 15.48 mm |
Function | Repair Kit, tilt pump |
Type | Repair Kit, tilt pump |
Inner diameter | 13.33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 45 mm |
Outer diameter | 72 mm |
Inner diameter | 32 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 1.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173057)
- 1x Febi Circlip (173802)
- 1x Febi Shaft Seal, wheel bearing (173803)
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Weight | 0.285 kg |
Function | Radiator Hose |
Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal, Cast Aluminium |
Placement on Vehicle | Rear |
Weight | 0.900 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.96 kg |
Placement on Vehicle | Front Axle Left |
Length | 342 mm |
Paired article numbers | 26099 |
Cone Size | 16 mm |
Function | Tie Rod |
Additional Information | with lock nut |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Placement on Vehicle | Rear |
Length | 130 mm |
Width | 74 mm |
Thickness | 65 mm |
Function | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.02 kg |
Placement on Vehicle | Front Axle Right |
Length | 258 mm |
Width | 93 mm |
Thickness | 80 mm |
Paired article numbers | 33014 |
Function | Tie Rod |
Additional Information | with lock nut |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (11958)
- 1x Febi Tie Rod End (11960)
- 1x Febi Nut (21146)
Important compatibility info
Heating / Cooling | without vent hole |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
for OE number | 51.06402.0098 |
Opening Temperature | 58 °C |
Weight | 0.026 kg |
Outer diameter | 24.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Paired article numbers | 106376 |
Function | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Right |
Weight | 1.32 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 204 mm |
Outer diameter | 93 mm |
Filter type | Spin-on Filter, with connection for water sensor |
Weight | 0.80 kg |
Type | Fuel Filter |
Function | Fuel Filter |
Gasket outer diameter | 72 mm |
Gasket inner diameter | 63 mm |
Internal Thread Size | 1" - 14 UNS |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Paired article numbers | 106375 |
Material | Rubber/Metal |
Weight | 1.33 kg |
Placement on Vehicle | Front Axle Left |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.816 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
for OE number | 8D0 199 382 AP |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 25 |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Weight | 1.018 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.542 kg |
Placement on Vehicle | Rear Axle |
Length | 115.9 mm |
Width | 53.7 mm |
Brake System | ATE |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.348 kg |
Placement on Vehicle | Front Axle |
Length | 155.2 mm |
Width | 68.8 mm. 71.4 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.245 kg |
Placement on Vehicle | Front Axle |
Length | 157.7 mm |
Width | 60.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Weight | 0.287 kg |
Length | 2335 mm |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.052 kg |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 790 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 156.4 mm |
Width | 78.7 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm. 19.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 2.20 kg |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 144 mm |
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.5 mm |
Width | 70 mm. 60.2 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Weight | 1.93 kg |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Bore Diameter | 8.5 mm |
Weight | 0.53 kg |
Type | Solenoid Valve |
Function | Solenoid Valve |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 574 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 570 N |
Stroke | 185 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 354 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 37178 |
Weight | 0.643 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11137)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (27726)
- 1x Febi Screw (31032)
- 1x Febi Nut (22263)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023