Important compatibility info
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M10x1,5 |
| Function | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 23 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Type | Pressure Switch, air conditioning |
| Function | Pressure Switch, air conditioning |
| Internal Thread Size | 3/8" - 24 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 10 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Thickness | 32 mm |
| Material | Cast Aluminium |
| Length | 170 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws, with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (39895)
- 1x Febi Screw (37265)
- 1x Febi Screw (38298)
- 1x Febi Nut (22263)
Important compatibility info
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| for OE number | 3985651 |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Outer diameter | 68.7 mm |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 24885 |
| Colour | Black |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | without lock barrel, without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Inner diameter 2 | 61 mm |
| Inner diameter 1 | 22 mm |
| Material | Thermoplast |
| Length | 104 mm |
| Placement on Vehicle | transmission sided, Front Axle |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Bellow Kit, drive shaft (176045)
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 18 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106465 |
| Cable Length | 470 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 114.2 mm |
| Width | 73 mm |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tappet |
| Outer diameter | 30 mm |
| Thickness | 24 mm |
| for OE number | 0942.55 |
| Type | Tappet |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 164 mm |
| Outer diameter | 67 mm |
| Thickness | 24 mm |
| Inner diameter | 19 mm |
| Steering arm type | for trailing arm |
| Function | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| Type | Repair Kit, control/trailing arm |
| for OE number | 1321 936 |
| Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 124.6 mm |
| Width | 70.6 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 21 |
| Number of Wings | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.3 mm |
| Width | 68.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 11.5 mm |
| Placement on Vehicle | Rear Axle |
| Length | 357 mm |
| Outer diameter | 111 mm. 79 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1070 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170526 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, parking brake |
| Length | 1774 mm |
| Placement on Vehicle | Rear |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Transverse |
| Number of mounting bores | 4 |
| Mounting points diameter | 8.2 mm. 10.7 mm |
| Function | Selector-/Shift Rod |
| for OE number | 1 472 771 |
| Type | Selector-/Shift Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Track rollers material | Plastic |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Steering | with tie rod end |
| Paired article numbers | 176733 |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left |
| Length | 445 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109581)
- 1x Febi Inner Tie Rod (100791)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 11971 |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 80 mm |
| Outer diameter | 130 mm |
| Width | 38 mm |
| Placement on Vehicle | inner |
| Type | Wheel Bearing |
| Bearing Code | 33116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 149 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information | with holder |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 810 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, drive shaft |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 85 mm |
| Thickness | 33 mm |
| Outer diameter | 155 mm |
| Material | FPM (fluoride rubber) |
| Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























