Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Suspension Spring |
| Number of Coils | 7 |
| Outer diameter | 141 mm |
| Placement on Vehicle | Front Axle |
| Length | 307 mm |
| Type | Suspension Spring |
| Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.23
Important compatibility info
| Weight | 0.66 kg |
| Internal Thread Size | M10 x 1,25 |
| Placement on Vehicle | Rear |
| for OE number | 50810-S5A-013 |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.22
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Weight | 0.09 kg |
| Length | 370 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Additional Information | with gasket/seal |
| Type | Switch, reverse light |
| Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.22
Important compatibility info
| Weight | 1.157 kg |
| Placement on Vehicle | Front Axle, Centre |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.21
Important compatibility info
| Internal Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle |
| Length | 170 mm |
| Width | 143 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.7 kg |
| Type | Suspension Strut Support Mount |
| Height | 50 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.21
Important compatibility info
| Cable Length | 250 mm |
| Number of circuits | 8 |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.20
Important compatibility info
| Weight | 2.450 kg |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Length | 140.5 mm |
| Width | 65.8 mm |
| Thickness/Strength 1 | 18.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.20
Important compatibility info
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 363 mm |
| Mounting points diameter | 16.5 mm |
| Eject Force | 260 N |
| Stroke | 107 mm |
| Housing length | 230 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.207 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.20
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Weight | 1.850 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.20
Important compatibility info
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 81 mm |
| Weight | 0.188 kg |
| Length | 126 mm |
| Paired article numbers | 185285 |
| Type | Bellow Kit, drive shaft |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Placement on Vehicle | Wheel Side, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (185301)
- 1x Febi Molybdenum Grease (02582)
£27.20
Important compatibility info
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 271.5 mm |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Placement on Vehicle | both sides |
| Length | 489 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 192 mm |
| Eject Force | 190 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.20
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Number of Coils | 5.3 |
| Weight | 2.18 kg |
| Outer diameter | 148 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Paired article numbers | 183952 |
| Placement on Vehicle | Front Axle Right, outer |
| Length | 260 mm |
| Spanner Size | 18 |
| Diameter | 1 mm |
| Material | Steel |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M14 x 1,5 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 23 mm |
| Weight | 0.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Inner diameter 2 | 81 mm |
| Inner diameter 1 | 31 mm |
| Weight | 0.189 kg |
| Paired article numbers | 185326 |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Length | 127 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (185281)
- 1x Febi Molybdenum Grease (02582)
£27.19
Important compatibility info
| Inner diameter | 18.2 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear |
| Material | Rubber/Metal |
| Outer diameter | 64.5 mm |
| Weight | 0.185 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Weight | 0.29 kg |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Material | Steel |
| Spanner Size | 19, 17 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M12 x 1,25, M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers, with nut |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tappet |
| Outer diameter | 30 mm |
| Thickness | 24 mm |
| for OE number | 0942.55 |
| Weight | 0.043 kg |
| Type | Tappet |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Thickness | 85 mm |
| Outer diameter | 80.1 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front, inner |
| Inner diameter | 14.1 mm |
| Weight | 0.455 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Weight | 0.630 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 50890-TR0-A81 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Weight | 0.12 kg |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Weight | 0.69 kg |
| Thickness | 68 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 184 mm |
| Function | Tie Rod End |
| Paired article numbers | 43152 |
| Spanner Size | 19 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, outer |
| Paired article numbers | 183956 |
| Rod/Strut | Coupling Rod |
| Thread Length | 22 mm |
| External Thread Size | M12 x 1,5 |
| Length | 255 mm |
| Diameter | 1 mm |
| Material | Steel |
| Spanner Size | 18 |
| Weight | 0.600 kg |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.19
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Weight | 0.11 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.18
Important compatibility info
| Weight | 0.085 kg |
| Placement on Vehicle | Rear Axle Left |
| Spanner Size | 11 |
| Paired article numbers | 175226 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 141.9 mm |
| Width | 66.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.09 kg |
| Type | Brake Pad Set, disc brake |
| Model | 9-5 ASTRA CASCADA INSIGNIA ZAFIRA |
| Manufacturer | OPEL SAAB VAUXHALL |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.17
Important compatibility info
| Thickness | 85 mm |
| Inner diameter | 13 mm |
| Function | Mounting, control/trailing arm |
| Length | 85 mm |
| Width | 69 mm |
| Material | Rubber/Metal |
| Outer diameter | 61 mm |
| Placement on Vehicle | Outer, Rear Axle Left, Rear Axle Right |
| Weight | 0.38 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.17
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 99 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 82 mm |
| Weight | 0.170 kg |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184449)
- 1x Febi Molybdenum Grease (02582)
£27.16
Important compatibility info
| Weight | 1.460 kg |
| Placement on Vehicle | Front Axle |
| Length | 138 mm |
| Width | 54.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.16
Important compatibility info
| Weight | 1.43 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 400 mm |
| Width | 90 mm |
| Thickness | 80 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (31273)
- 1x Febi Inner Tie Rod (30706)
£27.16
Important compatibility info
| Weight | 1.44 kg |
| Placement on Vehicle | Rear Axle |
| Width | 26 mm |
| Outer diameter | 190 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.5 mm |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.15
Important compatibility info
| Cone Size | 26 mm |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle |
| Weight | 1.56 kg |
| Length | 140 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with threaded sleeve, with crown nut and split pin, with sleeve |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (43445)
£27.15
Important compatibility info
| Weight | 0.973 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 153 mm |
| Inner diameter | 16 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 81 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.15
Important compatibility info
| Weight | 0.151 kg |
| Resistance | 1800 Ohm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106400 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1940 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106399 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1938 mm |
| Function | Sensor, wheel speed |
| Resistance | 1800 Ohm |
| Weight | 0.152 kg |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.14
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.17 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (174576)
- 2x Febi Rubber Buffer, suspension (104211)
£27.14
Important compatibility info
| Weight | 0.170 kg |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Left, outer |
| Length | 196 mm |
| Spanner Size | 11 |
| Paired article numbers | 171341 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| Weight | 0.6 kg |
| Material | PU (Polyurethane) |
| External Thread Size | M10 x 1,25 |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Thickness | 130 mm |
| Function | Rubber Buffer, suspension |
| Length | 113 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| Weight | 0.047 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 109324 |
| Number of Connectors / Ports | 2 |
| Cable Length | 616 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 77.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Length | 118.4 mm |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.9 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 1.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| Weight | 0.850 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 45 mm |
| Outer diameter | 60 mm |
| Inner diameter | 25 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Dust Cover | with dust cover |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Weight | 0.59 kg |
| Placement on Vehicle | Front Axle |
| Length | 140 mm |
| Width | 124 mm |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 60 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.13
Important compatibility info
| Weight | 0.20 kg |
| Type | Repair Set, retarder |
| Function | Repair Set, retarder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 49 mm |
| Material | Rubber/Metal |
| Outer diameter | 49 mm |
| Thickness | 55 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
| Weight | 0.410 kg |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.12
Important compatibility info
| Weight | 1.692 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 23 |
| External Teeth, Wheel Side | 25 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.11
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Weight | 0.208 kg |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.10
Important compatibility info
| Filter type | In-Line Filter, without filter heating |
| Pipe Diameter | 8 mm. 10 mm |
| Function | Fuel filter |
| Height | 210 mm |
| Weight | 0.450 kg |
| Outer diameter | 90 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.10
Important compatibility info
| Paired article numbers | 175123 |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.531 kg |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.10
Important compatibility info
| Weight | 0.88 kg |
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 190 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4 mm |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.10
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 0.900 kg |
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 160 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.3 mm |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Accessory Kit, brake shoes (31044)
- 1x Febi Brake Shoe Set, parking brake (10799)
£27.10
Important compatibility info
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 175124 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Weight | 0.531 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.10
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023