Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.168 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£169.07
Important compatibility info
| External Teeth, Wheel Side | 31 |
| Weight | 6.806 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 85.4 mm |
| Transmission-side joint diameter | 84.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183463 |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Additional Information | with spring, with gasket/seal |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£169.03
Important compatibility info
| Type | Water Separator, fuel system |
| Function | Water Separator, fuel system |
| Weight | 0.27 kg |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring, with sensor |
| Cable Length | 500 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£169.00
Important compatibility info
| Belt Pulley Diameter | 54 mm |
| Weight | 6.58 kg |
| Voltage | 12 V |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.99
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Mounting points diameter | 20 mm. 16 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Min. Length | 418 mm |
| Max. Length | 683 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 4.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | febi Plus |
| Paired article numbers | 181440 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.88
Important compatibility info
| Timing Chain Size | Z53AI-3 |
| Type | Timing Chain Kit |
| Weight | 0.859 kg |
| Function | Timing Chain Kit |
| Number of Chain Links | 140 |
| Extra Description | Basic Short Kit |
| for OE number | 000 993 39 78 S6 |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (172273)
- 1x Febi Tensioner, timing chain (180602)
- 1x Febi Guide, timing chain (174873)
- 1x Febi Guide, timing chain (182847)
- 1x Febi Guide, timing chain (174880)
- 1x Febi Holder, timing chain tensioner (45367)
£168.70
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Weight | 0.98 kg |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.66
Important compatibility info
| Weight | 2.533 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 194 |
| Function | Timing Chain Kit |
| Replaces | 30320 |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HP |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30498)
- 1x Febi Tensioner, timing chain (26750)
- 1x Febi Guide, timing chain (24273)
- 1x Febi Guide, timing chain (24274)
- 1x Febi Guide, timing chain (24275)
- 1x Febi Guide, timing chain (24276)
£168.44
Important compatibility info
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.3 kg |
| Outer diameter | 167 mm |
| Inner diameter | 34 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.34
Important compatibility info
| Outer diameter | 430 mm |
| Function | Clutch Disc |
| Type | Clutch Disc |
| Weight | 8.702 kg |
| for OE number | 8172802 |
| Number of Teeth | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.17
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
| Weight | 0.760 kg |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.11
Important compatibility info
| Surface | Coated |
| Chain Type | Simplex, with chain lock |
| Function | Timing Chain Kit |
| Number of Chain Links | 96 |
| Weight | 0.848 kg |
| Type | Timing Chain Kit |
| for OE number | 651 050 08 00 S9 |
| Timing Chain Size | G68HS-8, G68HS-9 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (25408)
- 1x Febi Timing Chain (47210)
- 1x Febi Guide, timing chain (38014)
- 1x Febi Guide, timing chain (30257)
£168.10
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.046 kg |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 796 mm |
| Inner length 1 | 796 mm |
| Outer length 1 | 1051 mm |
| Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Weight | 0.840 kg |
| Placement on Vehicle | Intake Side |
| Thickness | 44 mm |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Paired article numbers | 47572 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Function | Propshaft, axle drive |
| Weight | 6.550 kg |
| Type | Propshaft, axle drive |
| Length | 660 mm |
| Multi-piece | one-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Width | 64 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 5.5 kg |
| Inner diameter | 32 mm |
| Outer diameter | 85 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information | with gasket/seal |
| Replaces | 172491 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.04
Important compatibility info
| Weight | 0.451 kg |
| Placement on Vehicle | Intake Side |
| Material | Plastic |
| Paired article numbers | 172921 |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.03
Important compatibility info
| Weight | 2.957 kg |
| Material | Aluminium |
| Number of grooves | 8 |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.00
Important compatibility info
| Outer diameter | 89.2 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Width | 65 mm |
| Inner diameter | 33 mm |
| Weight | 4.250 kg |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£168.00
Important compatibility info
| Length | 894 mm |
| for OE number | 11 51 7 619 020 S2 |
| Operating Mode | Electric, Mechanical |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 1.841 kg |
| Type | V-Ribbed Belt Set |
| Number of Ribs | 6 |
| Additional Information | With belt pulley and friction wheel, with clamping elements |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, water pump (102466)
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
- 1x Febi Plug (173377)
- 1x Febi Cap (174341)
£168.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023