Important compatibility info
| Function | Accessory Kit, disc brake pad |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Length | 104 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL6948 |
Important compatibility info
| Thread Length 1 | 8 mm |
| Thread Length | 8 mm |
| Outer diameter | 89 mm |
| Height | 194 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | In-Line Filter |
Important compatibility info
| Thread Measurement 1 | M10x1 |
| Thread Measurement 2 | M10x1 |
| Type | Brake Hose |
| Length | 255 mm |
| Function | Brake Hose |
| Thread Type | with internal thread |
| Placement on Vehicle | Centre, Rear |
Important compatibility info
| Additional Information 2 | without banjo bolt |
| Thread Type | with internal thread |
| Length | 225 mm |
| Function | Brake Hose |
| Thread Size | M10x1 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Additional Information | with banjo fitting |
| Type | Brake Hose |
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Required quantity | 1 |
| Length | 1338 mm |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length | 234 mm |
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle, Left, outer |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Replaces | BCB2466 |
| Inner diameter 2 | 72 mm |
| Inner diameter 1 | 21 mm |
| Length | 95 mm |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Paired article numbers | BFC1095 |
| Length | 418 mm |
| Height | 17 mm |
| Width | 150 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Thread Type | with right-hand thread, with internal thread |
| Function | Tie Rod End |
| Type | Tie Rod End |
Important compatibility info
| Thread Measurement 2 | M14X1.5 |
| Length | 315 mm |
| Thread Measurement 1 | M14X1.5 |
| Function | Inner Tie Rod |
| Axle Joint Length | 315 mm |
| Axle Joint Thread Type | with external thread |
| Type | Inner Tie Rod |
Important compatibility info
| Placement on Vehicle | Rear Axle, Right, outer |
| Length | 234 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Important compatibility info
| Inner diameter | 12.2 mm |
| Diameter | 46.4 mm |
| Length | 53.5 mm |
| Function | Mounting, control/trailing arm |
| Replaces | BSK7875 |
| Type | Mounting, control/trailing arm |
| Paired article numbers | FSK7866 |
Important compatibility info
| Diameter | 17.5 mm |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Mounting Type | Bolted |
| Number of mounting bores | 3 |
| Version | Fitting Kit |
| Bore Diameter 1 | 7.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Diameter | 15 mm |
| Steering arm type | for control arm |
Important compatibility info
| Mounting Type | Pressed |
| Bore Diameter 1 | 18 mm |
| Bore Diameter | 46.4 mm |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Version | Fitting Kit |
Important compatibility info
| Thread Measurement 1 | M12x1.25 |
| Bore Diameter | 37.9 mm |
| Bore Diameter 1 | 15.5 mm |
| Function | Ball Joint |
| Mounting Type | Pressed |
| Version | Fitting Kit |
| Type | Ball Joint |
| Steering arm type | for control arm |
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Length | 98 mm |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 25 mm |
| Type | Bellow Kit, drive shaft |
| Lubrication | with grease lubrication |
| Additional Information 2 | with clamps |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















