Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£166.06
Important compatibility info
| Belts | with rounded tooth profile |
| Additional Information 2 | switchable water pump |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 145 |
| Water pump impeller material | Plastic |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (100790)
- 1x Febi Water Pump, engine cooling (180948)
£166.02
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.91
Important compatibility info
| Internal Thread Size | M14 x 1,5, M16 x 1,5, M20 x 1,5, M14 x 1 |
| Additional Information 2 | with seal ring |
| Outer diameter | 27 mm |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 4 |
| Pipe Diameter | 27 mm |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.82
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 815 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 500 mm |
| Pipe Diameter | 80 mm. 71 mm |
| Function | Shock Absorber |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 17 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 20 mm. 24 mm |
| Max. Length | 714 mm |
| Min. Length | 438 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 16 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 810 mm |
| Min. Length | 495 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.81
Important compatibility info
| Colour | Black, Green |
| Number of Connectors / Ports | 3 |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl flaps (induction pipe) |
| for OE number | 11 61 7 560 538 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.68
Important compatibility info
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Operating Mode | Electric |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.65
Important compatibility info
| Timing Chain Size | Z53AI-3 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 140 |
| Extra Description | Basic Short Kit |
| for OE number | 000 993 39 78 S6 |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (172273)
- 1x Febi Tensioner, timing chain (180602)
- 1x Febi Guide, timing chain (174873)
- 1x Febi Guide, timing chain (182847)
- 1x Febi Guide, timing chain (174880)
- 1x Febi Holder, timing chain tensioner (45367)
£165.45
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.43
Important compatibility info
| Width | 88 mm |
| Outer diameter | 280 mm |
| Inner diameter | 48 mm |
| Type | Vibration Damper, crankshaft |
| Function | Vibration Damper, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.11
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90. 72 |
| Timing Chain Size | G67HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31073)
- 1x Febi Timing Chain (48570)
- 1x Febi Tensioner, timing chain (170581)
- 1x Febi Tensioner, timing chain (176279)
- 1x Febi Guide, timing chain (170583)
- 1x Febi Guide, timing chain (170578)
- 1x Febi Guide, timing chain (176280)
- 1x Febi Guide, timing chain (175348)
- 1x Febi Gear, injection pump (177724)
- 1x Febi Sprocket, crankshaft (177725)
- 1x Febi Gear/Sprocket, camshaft (180244)
£165.08
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Height | 81 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Clutch Booster |
| Type | Clutch Booster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Number of Ribs | 6 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 796 mm |
| Inner length 1 | 796 mm |
| Outer length 1 | 1051 mm |
| Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Additional Information | with gaskets/seals |
| Additional Information 2 | with valves |
| Type | Bearing Bracket, camshaft |
| Function | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (176249)
- 2x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171915)
- 2x Febi Control Valve, camshaft adjustment (182093)
£165.07
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 56 mm |
| for OE number | 36012358 |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.07
Important compatibility info
| Function | Expansion Tank, coolant |
| Length | 490 mm |
| Width | 240 mm |
| Material | PP (Polypropylene) |
| Thickness | 325 mm |
| Fill quantity | 5.5 l |
| Opening pressure | 110 kPa. 70 kPa |
| Additional Information | with coolant level sensor, with lids |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| External Thread Size | M16 x 1,5 |
| Additional Information | with insulating hood |
| Outer diameter | 258 mm. 225 mm |
| Thickness | 262 mm. 628 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20130 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£165.00
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Min. Length | 413 mm |
| Pipe Diameter | 60 mm. 45 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 703 mm |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M14 x 1,5 |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.97
Important compatibility info
| Length | 642 mm |
| Outer diameter | 60 mm |
| Stroke | 457 mm |
| Mounting points diameter | 35 mm. 24 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.89
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.84
Important compatibility info
| Height | 146 mm |
| Outer diameter | 108 mm |
| Inner diameter | 88 mm |
| Number of Connectors / Ports | 3 |
| Function | Water Separator, fuel system |
| Type | Water Separator, fuel system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.64
Important compatibility info
| Function | Wheel Hub |
| Inner diameter | 140 mm |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 337 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£164.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023