Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7449 |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | FCA7468 |
Important compatibility info
| Function | Bellow, drive shaft |
| Extra Description | Universal |
| Diameter From | 60 mm |
| Diameter To | 84 mm |
| to shaft diameter | 32 mm |
| Length from | 94 mm |
| Length to | 125 mm |
| Height | 98 mm |
| Type | Bellow, drive shaft |
| Lubrication | with grease lubrication |
| Replaces | BCB5008 |
| Additional Information 2 | with clamps |
Important compatibility info
| Material | Plastic |
| Function | Master Cylinder, clutch |
| Inner diameter | 15.87 mm |
| Type | Master Cylinder, clutch |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FDL6316 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Thread Size | M10X1.5 |
| Length | 233 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
| Thread Measurement 2 | M10X1.25 |
| Thread Size | M10X1.25 |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Suspension Rod |
| Length | 284 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | FDL7470 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Length | 312 mm |
| Height | 58 mm |
| Width | 189 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Important compatibility info
| Length | 278 mm |
| Height | 34 mm |
| Width | 217 mm |
| Function | Filter, cabin air |
| Paired article numbers | BFC1161 |
| Type | Filter, cabin air |
| Filter type | Particulate Filter |
Important compatibility info
| Height of bump stop | 134 mm |
| Dust protection diameter 1 | 48 mm |
| Dust protection diameter 2 | 52 mm |
| Dust protection height | 179 mm |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Diameter 1 bump stop | 18 mm |
| Diameter 2 bump stop | 18 mm |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Height | 24 mm |
| Inner diameter | 14 mm |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5208 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5020)
- 1x Borg & Beck Spring Seat (BSM5355)
Important compatibility info
| Thread Measurement 1 | M14x1.5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Paired article numbers | FTR5796 |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Additional Information | without gaskets/seals |
| Impeller Diameter | 93 mm |
| Water Pump Pulley Diameter | 52 mm |
Important compatibility info
| Impeller Diameter | 50 mm |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 128 mm |
| Type | Water Pump, engine cooling |
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Holes | 5 |
| Number of Ribs | 3 |
| Impeller Diameter | 49.5 mm |
| Water Pump Pulley Diameter | 65 mm |
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Teeth | 21 |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Height | 78 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Left |
| Inner diameter | 12 mm |
| Length | 160 mm |
Important compatibility info
| Mounting Type | Pressed |
| Thread Measurement 1 | M14x1.5 |
| Version | Fitting Kit |
| Type | Ball Joint |
| Function | Ball Joint |
| Bore Diameter 1 | 14.8 mm |
| Diameter | 46.1 mm |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Upper |
| Bore Diameter 2 | 18.6 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















