Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 640 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.041 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre |
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 0.814 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 720 mm |
Number of Connectors / Ports | 2 |
Weight | 0.045 kg |
Cable Length | 630 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 185688 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
External Teeth, Wheel Side | 26 |
Internal Teeth, wheel side | 21 |
Weight | 1.58 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Metal |
Number of Wings | 6 |
Seal Material | Rubber |
Weight | 0.88 kg |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Function | Water Pump, engine cooling |
for OE number | 16100-09130 |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pressure Converter, exhaust control |
Number of Connectors / Ports | 2 |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Weight | 0.067 kg |
for OE number | 1618.JC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 26 mm |
Weight | 0.239 kg |
Material | Plastic |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.50 kg |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length | 1506 mm |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 2.6 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 230 mm |
Thickness | 40.37 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 7 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.292 kg |
Width of castor bearing surface | 27 mm |
Width | 43 mm |
Material | Metal |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Weight | 3.025 kg |
Function | Brake Disc |
Number of mounting bores | 1 |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Outer diameter | 239 mm |
Thickness | 38.6 mm |
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Housing length | 315 mm |
Placement on Vehicle | both sides |
Length | 543 mm |
Eject Force | 470 N |
Stroke | 192 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 18 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.289 kg |
Placement on Vehicle | Front Axle |
Length | 155.2 mm. 156.5 mm |
Width | 75.3 mm. 74.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.7 mm. 18.4 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Repair Kit, tailgate |
Number of circuits | 9 |
Cable Length | 300 mm |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 410 mm |
Number of circuits | 1 |
Spanner Size | 22 |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Weight | 0.083 kg |
Type | Oxygen Sensor |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Voltage | 12 V |
Colour | Blue |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Additional Information 2 | with seal ring |
Placement on Vehicle | Front |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 490 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.052 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 65 mm |
Thickness | 99 mm |
Inner diameter | 14 mm |
Weight | 0.650 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.782 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 175 mm |
Material | Steel |
Thickness | 51 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (47753)
- 2x Febi Nut, stabiliser bar (22264)
- 1x Febi Link/Coupling Rod, stabiliser bar (47866)
Important compatibility info
for OE number | 11 22 028 43R |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | both sides |
Weight | 0.380 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023