Important compatibility info
| Paired article numbers | 175123 |
| Placement on Vehicle | Rear Axle Right |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Length | 220 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 111 mm |
| Length | 351 mm |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 320 mm |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod |
| Paired article numbers | 49082 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (36508)
- 1x Febi Clamping Clip (23842)
- 1x Febi Bellow, steering (38621)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Additional Information | with gasket/seal |
| Outer diameter | 73 mm |
| Opening Temperature | 85 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 314 mm |
| Paired article numbers | 49081 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (36509)
- 1x Febi Bellow, steering (38621)
- 1x Febi Clamping Clip (23842)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Type | Actuator, central locking system |
| Extra Description | febi Plus |
| Function | Actuator, central locking system |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 460 mm |
| Housing Diameter | 18 mm |
| Eject Force | 100 N |
| Stroke | 164 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, rear window |
| Housing length | 266.5 mm |
| Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Ignition Coil |
| Housing Colour | black |
| Vehicle Equipment | for vehicles with ignition distributor |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 503 mm |
| Height | 50 mm |
| Width | 229 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 126 mm |
| Type | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 16.3 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 155.1 mm |
| Width | 70.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Belt Pulley, water pump |
| Function | Belt Pulley, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139.2 mm |
| Width | 55.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate), Rubber/Metal |
| Function | Gasket, automatic transmission oil sump |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 75 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42966 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 60 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 213 mm |
| Additional Information 2 | with pre-filter |
| Length | 269 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
| Extra Description | ProKit |
| for OE number | 81.95301.6363 |
| Placement on Vehicle | Front Axle |
| Length | 195 mm |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Cone Size | 22 mm |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Thread Type | with left-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 110 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Inner diameter | 15 mm |
| Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















