Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.19 kg |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 16.7 mm |
Width | 55.9 mm |
Placement on Vehicle | Front Axle |
Length | 142.6 mm |
Weight | 1.532 kg |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information | with retaining spring holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.753 kg |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
for OE number | 4060A417 |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
Additional Information | with grease |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 23 |
Weight | 1.798 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 1.980 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint, without rubber mount(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Material | FKM (fluorocarbon rubber) |
Outer diameter | 22.6 mm |
Valve stem diameter | 5 mm |
Type | Seal Set, valve stem |
Function | Seal Set, valve stem |
Height | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Weight | 0.800 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Placement on Vehicle | Right |
for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.148 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 64 |
Timing Chain Size | G53HP, G53HR |
Function | Chain, oil pump drive |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 184.5 mm |
Mounting points diameter | 15 mm |
Placement on Vehicle | both sides |
Length | 314 mm |
Eject Force | 485 N |
Stroke | 92 mm |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.171 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.15 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 6 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.514 kg |
Number of Teeth, ABS ring | 48 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 20 |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Wheel Side |
External Teeth, Wheel Side | 24 |
ABS Ring Diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 60 mm |
Weight | 0.265 kg |
Type | Tensioner Pulley, timing belt |
Function | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.057 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1056 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.230 kg |
Height | 450 mm |
Additional Information | with gasket/seal |
Outer diameter | 182 mm |
Inner diameter | 155 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.622 kg |
Type | Bolt, release fork |
Function | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing, clutch lever (12260)
- 2x Febi Circlip, kingpin (02668)
- 2x Febi Shaft Seal, clutch release bearing shaft (32481)
- 1x Febi Bolt, release fork (31868)
- 2x Febi Circlip (05336)
Important compatibility info
Weight | 0.13 kg |
Housing material | Aluminium |
Placement on Vehicle | both sides |
Length | 279 mm |
Housing Diameter | 20 mm |
Eject Force | 520 N |
Stroke | 95 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 162.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 90 mm |
Weight | 0.178 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184408)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Lower, Centre |
Length | 157 mm |
Width | 70 mm |
Thickness | 48 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Fuel filter |
Pipe Diameter | 11.5 mm |
Weight | 0.44 kg |
Function | Fuel filter |
Additional Information | with valve |
Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
Height | 143 mm |
Outer diameter | 98 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information | with retaining spring holder |
Weight | 1.9 kg |
Placement on Vehicle | Front Axle |
Length | 137.9 mm |
Width | 61.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023