Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 144.6 mm |
| Width | 56.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 52.2 mm |
| Extra Description | ProKit |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.4 mm |
| Thickness | 67 mm |
| Additional Information | with nuts |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (104367)
- 1x Febi Bolt (173427)
- 1x Febi Bolt (174653)
- 2x Febi Nut (37412)
- 1x Febi Bolt (174021)
- 1x Febi Nut (174652)
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1582 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 81 mm |
| Inner diameter 1 | 31 mm |
| Paired article numbers | 185326 |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Length | 127 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (185281)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front |
| Length | 1430 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 102079 |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 75 mm |
| Outer diameter | 86 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 590 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Pipe |
| Cooling Hose | from thermostat to waterpump |
| Material | Plastic |
| Length | 342 mm |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
| Additional Information 2 | with retaining strap, with clip, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clip (103137)
- 1x Febi Coolant Pipe (103136)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 62.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with staples |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 105 mm |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 51891028 |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 175479 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Paired article numbers | 175478 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Additional Information | with grease |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 102.8 mm |
| Number of Teeth | 19 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 045 121 011 H |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width | 32 mm |
| Inner diameter | 24 mm |
| Outer diameter | 53 mm |
| Material | Metal |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 39823 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (39040)
- 1x Febi Inner Tie Rod (39690)
Important compatibility info
| Housing material | Metal |
| Length | 129 mm |
| Outer diameter | 74 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 105 mm |
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 1.5 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Splash Guard, brake disc |
| Paired article numbers | 174921 |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1 675 963 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 22 mm |
| Number of Teeth | 117 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 456 mm |
| Housing Diameter | 18 mm |
| Eject Force | 185 N |
| Housing length | 251 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Stroke | 182 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 35 mm |
| Opening Temperature | 82 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with grease |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Additional Information 2 | with brake caliper screws, with clamp, with guide sleeve |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 12 mm |
| Material | Steel |
| Function | High-pressure Pipe, injection system |
| Type | High-pressure Pipe, injection system |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 160 mm |
| Length | 180 mm |
| Inner diameter | 105 mm |
| Additional Information 2 | without ball bearing |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | Metal |
| Outer diameter | 60 mm |
| Inner diameter | 17 mm |
| Number of grooves | 6 |
| Mounting points diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (27301)
- 1x Febi Bellow Kit, steering (27128)
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 311 mm |
| Housing Diameter | 19 mm |
| Eject Force | 570 N |
| Stroke | 84 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 181 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107050 |
| Cable Length | 140 mm |
| Number of circuits | 6 |
| Type | Cable Repair Set, tail light assembly |
| Function | Cable Repair Set, tail light assembly |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Master Cylinder, clutch |
| Diameter 1 | 19 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.7 mm |
| Placement on Vehicle | Rear Axle |
| Length | 148.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Width | 54.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Paired article numbers | 178430 |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Belts | with rounded tooth profile |
| Width | 18 mm |
| Number of Teeth | 124 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14378)
- 1x Febi Tensioner Pulley, timing belt (06688)
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 5 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Width | 73.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Length | 155.4 mm. 156.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 129 mm |
| Width | 75.4 mm. 70.4 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Manufacturer | BMW MINI TOYOTA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, outer, behind the axle |
| Additional Information | with lock nut |
| Cone Size | 19 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
| External Thread Size | M16 x 1,5, M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 26174 |
| Function | Tie Rod |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (30820)
- 1x Febi Tie Rod End (19812)
Important compatibility info
| Material | Sheet Steel |
| Inner diameter | 12 mm. 14 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 129.9 mm |
| Width | 56.2 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 76 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Length | 131.3 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 31 mm |
| Placement on Vehicle | Front Axle Left, Front, Rear, Front Axle Right |
| Thickness | 92 mm |
| Material | Rubber/Metal |
| Outer diameter | 72 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































