Proud to be a UK-based company
Contact us
Important compatibility info
| Housing material | Metal |
| Length | 129 mm |
| Outer diameter | 74 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.22
Important compatibility info
| for OE number | 1 675 963 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 22 mm |
| Number of Teeth | 117 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.22
Important compatibility info
| Placement on Vehicle | Lower, Upper, Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 21 mm |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
| Multi-piece | Two-piece |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, stabiliser bar (173529)
- 1x Febi Mounting, stabiliser bar (173523)
£25.22
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 456 mm |
| Housing Diameter | 18 mm |
| Eject Force | 185 N |
| Housing length | 251 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Stroke | 182 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.21
Important compatibility info
| Material | Metal |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 10 mm |
| Mounting points diameter | 17 mm |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.20
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.20
Important compatibility info
| Additional Information | with grease |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Additional Information 2 | with brake caliper screws, with clamp, with guide sleeve |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.20
Important compatibility info
| Outer diameter | 12 mm |
| Material | Steel |
| Function | High-pressure Pipe, injection system |
| Type | High-pressure Pipe, injection system |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.20
Important compatibility info
| Hole Spacing | 160 mm |
| Length | 180 mm |
| Inner diameter | 105 mm |
| Additional Information 2 | without ball bearing |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (27301)
- 1x Febi Bellow Kit, steering (27128)
£25.19
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 311 mm |
| Housing Diameter | 19 mm |
| Eject Force | 570 N |
| Stroke | 84 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 181 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.19
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107050 |
| Cable Length | 140 mm |
| Number of circuits | 6 |
| Type | Cable Repair Set, tail light assembly |
| Function | Cable Repair Set, tail light assembly |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.19
Important compatibility info
| Function | Master Cylinder, clutch |
| Diameter 1 | 19 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.19
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.7 mm |
| Placement on Vehicle | Rear Axle |
| Length | 148.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Width | 54.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.19
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.18
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Paired article numbers | 178430 |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.18
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 5 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.18
Important compatibility info
| Additional Information 2 | with piston clip |
| Placement on Vehicle | Front Axle |
| Width | 73.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Length | 155.4 mm. 156.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.17
Important compatibility info
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 129 mm |
| Width | 75.4 mm. 70.4 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Manufacturer | BMW MINI TOYOTA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.17
Important compatibility info
| Filter type | In-Line Filter, with water drain screw |
| Function | Fuel filter |
| Outer diameter | 98 mm |
| Additional Information | with valve |
| Height | 138 mm |
| Length | 138 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023