Important compatibility info
Length | 257 mm |
Height | 84 mm |
Width | 232 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Weight | 0.44 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.176 kg |
Placement on Vehicle | both sides |
Length | 345 mm |
Housing Diameter | 18 mm |
Eject Force | 350 N |
Stroke | 122 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 195.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 1060 mm |
Type | Sensor, wheel speed |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 107211 |
Number of Connectors / Ports | 2 |
Weight | 0.094 kg |
Function | Sensor, wheel speed |
Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 166 mm |
Width | 159 mm |
Outer diameter | 57 mm. 122 mm |
Inner diameter | 12 mm |
Weight | 0.850 kg |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 70 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 74 |
Weight | 0.097 kg |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Outer diameter | 85 mm |
Additional Information 2 | with seal ring |
Height | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.008 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | outer, Rear Axle Right |
Length | 700 mm |
Paired article numbers | 182696 |
Weight | 0.135 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with quick coupling |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.306 kg |
Cooling Hose | from engine to thermostat |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Placement on Vehicle | Front |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 31 mm |
Length | 115 mm |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Weight | 0.215 kg |
Inner diameter 2 | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184375)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
External Teeth, Wheel Side | 33 |
Internal Teeth, wheel side | 25 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Number of Teeth, ABS ring | 29 |
ABS Ring Diameter | 78 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Thread Size | M20x1,5 |
Weight | 2.446 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 151.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.8 mm |
Weight | 1.570 kg |
Inspection Tag | ECE R90 Approved |
Width | 52.6 mm |
Wear Warning Contact | with acoustic wear warning |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Nut, kingpin |
Type | Nut, kingpin |
Weight | 1.1 kg |
Spanner Size | 120 |
Paired article numbers | 182467 |
Placement on Vehicle | Left |
Bolt Head/Nut Design | Male Hex |
Height | 25 mm |
Material | Steel |
Surface | Phosphatized |
Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter |
Height | 70 mm |
Weight | 0.285 kg |
Function | Hydraulic Filter, automatic transmission |
Transmission ID | 6T30 (MH9) |
Type | Hydraulic Filter, automatic transmission |
Transmission Type | 6-Speed Automatic Transmission |
Width | 138 mm |
Length | 256 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.130 kg |
Placement on Vehicle | transmission sided, Front Axle Left |
Length | 86 mm |
Material | Rubber |
Inner diameter 1 | 42 mm |
Inner diameter 2 | 74 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102502)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.118 kg |
Height | 161 mm. 82.5 mm |
Outer diameter | 74.5 mm |
Inner diameter | 30 mm |
Filter type | Filter Insert |
Inner diameter 1 | 25 mm |
Outer diameter 1 | 33.5 mm |
Type | Fuel filter set |
Function | Fuel filter set |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.327 kg |
Height | 137 mm |
Width | 137 mm |
Filter type | In-Line Filter |
Type | Fuel filter |
Function | Fuel filter |
Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.115 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 172061 |
Resistance | 1800 Ohm |
Cable Length | 1346 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Placement on Vehicle | both sides |
Length | 556 mm |
Housing Diameter | 18 mm |
Eject Force | 450 N |
Stroke | 224 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 302.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M20x1,5 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 23 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Number of Teeth, ABS ring | 44 |
Weight | 1.906 kg |
ABS Ring Diameter | 85 mm |
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023