Proud to be a UK-based company
Contact us
Important compatibility info
| Cone Size | 21.6 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Weight | 1.87 kg |
| Mounting points diameter | 12 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.61
Important compatibility info
| Weight | 1.290 kg |
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Front Axle |
| Length | 128.7 mm |
| Width | 46.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.61
Important compatibility info
| Weight | 0.688 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.60
Important compatibility info
| Weight | 0.730 kg |
| Material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of Wings | 20 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.60
Important compatibility info
| Placement on Vehicle | Left, Front |
| Weight | 0.726 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.60
Important compatibility info
| Weight | 0.2 kg |
| Function | Intake Valve |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Piston Rod Thread | M16 x 1,5 |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 190 mm |
| Brake Type | Drum Brake |
| Stroke | 75 mm |
| Parameter | Typ 20 |
| Additional Information | with fastening/mounting material |
| Weight | 3.892 kg |
| Internal Thread Size | M16 x 1,5 |
| Type | Diaphragm Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Additional Information 2 | with fastening material, with ball bearing |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.692 kg |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (36860)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
£24.59
Important compatibility info
| Weight | 0.514 kg |
| Additional Information | without stop function |
| Mounting points diameter | 18 mm |
| Housing length | 395.5 mm |
| Placement on Vehicle | both sides |
| Length | 667 mm |
| Eject Force | 755 N |
| Stroke | 238 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| External Thread Size | M10 x 1,25 |
| Weight | 0.865 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 1.514 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 20 |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Wheel Side |
| External Teeth, Wheel Side | 24 |
| ABS Ring Diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 1.6 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 328 mm |
| Outer diameter | 109 mm |
| Number of Coils | 7.5 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Thread Length | 36.7 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 19 |
| Paired article numbers | 48141 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Length | 99 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Weight | 0.38 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Front Axle |
| Length | 334 mm |
| Outer diameter | 157 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Number of Coils | 4.4 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Length | 2540 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Weight | 0.27 kg |
| DIN / ISO | 7867 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 185 mm |
| Width | 80 mm |
| Material | Rubber/Metal |
| Weight | 1.493 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Rear Axle Lower, Front |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.71 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Weight | 0.258 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.45 kg |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Right, Left |
| Type | Wiper Bearing |
| Function | Wiper Bearing |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.318 kg |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (109587)
£24.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023