Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 143 mm |
| Weight | 1.986 kg |
| Width | 143 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.30
Important compatibility info
| Weight | 2.909 kg |
| Placement on Vehicle | Left Front |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.30
Important compatibility info
| Number of Connectors / Ports | 1 |
| Function | Fuel Pump |
| Length | 88 mm |
| Weight | 2.610 kg |
| Internal Thread Size | M16 x 1,5 |
| Operating Mode | Mechanical |
| Type | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.27
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Additional Information | with gasket/seal, with fuel sender unit |
| Function | Fuel Feed Unit |
| Weight | 0.95 kg |
| Pipe Diameter | 8 mm |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.24
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.350 kg |
| Bore Diameter | 19 mm. 21 mm |
| Steering arm type | Trailing Arm |
| Length | 383 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 130/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 0.861 kg |
| Type | Cylinder Head Gasket Set, air compressor |
| Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 2 kW |
| Weight | 4.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Weight | 0.36 kg |
| Valve type | Solenoid Valve |
| Type | EGR valve, exhaust control |
| Function | EGR valve, exhaust control |
| Internal Thread Size | M10 x 1, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 130 A |
| Belt Pulley Diameter | 65 mm |
| Weight | 7.02 kg |
| Current Strength | 130 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 2.114 kg |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 2.38 kg |
| Outer diameter 2 | 135 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 67 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 55 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.23
Important compatibility info
| Weight | 3.530 kg |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Weight | 1.368 kg |
| Number of Connectors / Ports | 5 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Weight | 5.800 kg |
| Outer diameter | 362 mm |
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| for OE number | 81.30301.0529 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.19
Important compatibility info
| Weight | 0.351 kg |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Control, swirl covers (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl covers (induction pipe) |
| Operating Mode | pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.14
Important compatibility info
| Number of Teeth | 46 |
| Extra Description | febi Plus |
| Weight | 1.011 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| for OE number | 25203205 |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.14
Important compatibility info
| Function | Thermostat, coolant |
| Weight | 1.217 kg |
| Opening Temperature | 74 °C |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Outer diameter | 66.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.13
Important compatibility info
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Thread Size | M22x1,5 |
| Additional Information | with axle nut |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Weight | 6.292 kg |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 78 mm |
| Transmission-side joint diameter | 82 mm |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.09
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 227 mm. 290 mm |
| Thickness | 250 mm. 210 mm. 500 mm |
| Weight | 11.67 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| External Thread Size | M18 x 1,5, M10 x 1 |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.06
Important compatibility info
| Outer diameter | 155 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 47 mm |
| Weight | 2.943 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (28242)
- 1x Febi Centering Bolt, crankshaft pulley (33557)
£149.02
Important compatibility info
| Weight | 2.4 kg |
| External Thread Size | M15 x 1,5 |
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£149.00
Important compatibility info
| Length | 123 mm |
| Material | Rubber/Metal |
| Outer diameter | 123 mm |
| Inner diameter | 30.1 mm |
| Weight | 4.800 kg |
| Type | Airbag Lifting Device Roll, lift axle |
| Function | Airbag Lifting Device Roll, lift axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.84
Important compatibility info
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Length | 1588 mm |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Weight | 23.937 kg |
| Extra Description | ProKit |
| Pipe Diameter | 60 mm |
| Function | Tie Rod |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.81
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 126 |
| Function | Timing Chain Kit |
| Weight | 2.544 kg |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HP, D67HR |
| Replaces | 30302; 44952; 44970 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear/Sprocket, camshaft (25022)
- 1x Febi Timing Chain (17650)
- 1x Febi Sprocket, crankshaft (25033)
- 1x Febi Guide, timing chain (15493)
- 1x Febi Guide, timing chain (10407)
- 1x Febi Guide, timing chain (10408)
- 1x Febi Tensioner, timing chain (02481)
£148.65
Important compatibility info
| Mounting points diameter | 6 mm |
| Function | Washer Fluid Reservoir, window cleaning |
| Fill quantity | 9.8 l |
| Length | 402 mm |
| Type | Washer Fluid Reservoir, window cleaning |
| Weight | 1.348 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.65
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Weight | 12.66 kg |
| Placement on Vehicle | Rear Axle |
| Pipe Diameter | 48 mm |
| Length | 531 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.43
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Outer diameter | 158 mm |
| Weight | 2.961 kg |
| Inner diameter | 38 mm |
| Width | 157 mm |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.27
Important compatibility info
| for OE number | 24321-2B100 S1 |
| Number of Chain Links | 158 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Extra Description | Basic Short Kit |
| Weight | 0.893 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108378)
- 1x Febi Tensioner, timing chain (170729)
- 1x Febi Guide, timing chain (174739)
- 1x Febi Guide, timing chain (174742)
£148.24
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Weight | 2.0 kg |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with spring |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 84.7 mm |
| Wheel Sided Joint Diameter | 85.6 mm |
| Min. Length | 782 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
| Paired article numbers | 183675 |
| External Teeth, Wheel Side | 31 |
| Weight | 7.182 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£148.24
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023