Important compatibility info
| Inner diameter | 17.4 mm |
| Outer diameter | 26.2 mm |
| Function | Connector, washer-fluid pipe |
| Type | Connector, washer-fluid pipe |
| Mounting points diameter | 6.5 mm |
| Number of mounting bores | 3 |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 155 207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1844.92 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side |
| Inner diameter | 5 mm |
| Colour | Brown |
| Function | Seal Set, valve stem |
| Type | Seal Set, valve stem |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 10 mm |
| Outer diameter 2 | 22.7 mm |
| Inner diameter | 6 mm |
| Function | Seal Set, valve stem |
| Colour | Green |
| Height | 21 mm |
| Type | Seal Set, valve stem |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 70 |
| Timing Chain Size | Z46 |
| Function | Chain, oil pump drive |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 5 mm |
| Function | Fuel Hose |
| Suited for fuel type | Ethanol Blended Petrol (E10) |
| Type | Fuel Hose |
| Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 284 mm |
| Housing Diameter | 19 mm |
| Eject Force | 720 N |
| Stroke | 87 mm |
| Mounting points diameter | 16.5 mm. 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 165 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 2070 mm |
| Paired article numbers | 108710 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 2070 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right, Front Axle Right |
| Paired article numbers | 47330 |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Length | 2150 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Upper, both sides, Front |
| Length | 247 mm |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Lower, Front, Front Axle Left, Front Axle Right |
| Length | 86 mm |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Inner diameter | 12 mm |
| Outer diameter | 85 mm |
| Material | Metal |
| Width of castor bearing surface | 14.9 mm |
| Width | 19.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 179289 |
| Placement on Vehicle | Right |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 253 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 27 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 24 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Front |
| Material | Rubber/Metal |
| Paired article numbers | 12427 |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 40 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | with ABS sensor ring, without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 303 mm |
| Material | Steel |
| Spanner Size | 19 |
| Paired article numbers | 41198 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Light Design | LED |
| Placement on Vehicle | Right |
| Shape/Form | round |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | ADR |
| Light Function | with reverse light (LED), without licence plate light |
| Depth | 86 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Protection Type (IP Code) | IP6K9K |
| Distance of fastening bolts | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 55 700 657 |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 170839 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 99 mm |
| Width | 55.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 102.2 mm |
| Width | 41 mm |
| Wear Warning Contact | not prepared for wear warning indicator |
| Inspection Tag | ECE R90 |
| Thickness/Strength 1 | 13.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.8 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Width | 56 mm |
| Length | 131.7 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Resistance | 150 Ohm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 109700 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1100 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 1194 mm |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Plastic |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 156 202 08 19 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 16.6 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Length | 132.6 mm |
| Width | 50.4 mm |
| Additional Information | with retaining spring holder |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 27859 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 381 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Outer diameter 2 | 183 mm |
| Outer diameter 1 | 163 mm |
| Inner diameter | 134 mm |
| Additional Information | with gasket/seal |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2120 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 2000 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 253 mm |
| Height | 40 mm |
| Width | 134 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Connector Shape | Square |
| Housing Colour | Grey |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with seal ring, with cable |
| Spanner Size | 22 |
| Number of Connectors / Ports | 1 |
| Cable Length | 200 mm |
| Shifting Points | 0.5 bar |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide, timing chain |
| Placement on Vehicle | Right, Lower |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 60 mm |
| Outer diameter | 74 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 189058, 189921 |
| for OE number | 1515A159 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Placement on Vehicle | both sides |
| Length | 478 mm |
| Housing Diameter | 19 mm |
| Housing length | 295 mm |
| Eject Force | 610 N |
| Stroke | 149 mm |
| Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139 mm |
| Width | 58.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Eject Force | 680 N |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 261.5 mm |
| Stroke | 115 mm |
| Housing Diameter | 19 mm |
| Length | 455 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 175287 |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Left |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Exhaust Valve |
| Length | 73.3 mm |
| Valve head diameter | 58.95 mm |
| Type | Exhaust Valve |
| Notches / Holes Number | 1 |
| Valve stem diameter | 7.985 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 2300 mm |
| Paired article numbers | 103770 |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Right |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 65 mm |
| Inner diameter | 14 mm |
| Mounting points diameter | 10 mm |
| Material | Plastic |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information | with two sealing lips |
| Material | FPM (fluoride rubber) |
| Outer diameter | 170 mm |
| Thickness | 11 mm |
| Inner diameter | 139 mm |
| Type | Shaft Seal, wheel hub |
| Function | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 51.1 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Width | 184 mm |
| Height | 106 mm |
| Length | 196.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sleeve, nozzle holder |
| Function | Sleeve, nozzle holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Left, Right |
| Length | 725 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































